Larsen Lights provide a full range of led lights/led headlights for your Tractors, Combine, Harvesters, Harvest Equipment, Planting Equipment, Tillage Equipment, Hay and Forage Equipment, Chemical Applicators, Ag Trailers. We also have products for John Deere, AGCO, Case IH, New Holland Equipment, and more.
Combo beam/Hi-Lo or Flood beam light for Gleaner Rx2 series of combines. R42/52/62/72 early models and lower cab lights on all C / Rx2 using the 1.5" ball mount system. Please verify the serial number below in the fitments guide.
Headlight for some Agco tractors using 3 bolts to hold the light. Spacing between the 2 mounting holes is 5". Please verify your tractor use the 3 hole system before ordering.
An LED replacement light for JD combines with the rectangular row finder light mounted in the grain tank on the right and left sides. The price is for one light. Updated model for better light aim, and easier install.
No place for an auxiliary switch? Don't want to modify your dash? This is the lamp for you. It features an integrated toggle switch for ease of use. Recommended for off-road use only. Also available in ROPS Mounting Kit, 8302279!
This dual-lamp ROPS mounted kit offers versatility and durability! See where you're going and where you've been by positioning the lamps in any direction. Both lamps have integrated toggle switches for separate operations. Coated u-bolt bracket to prevent scratches and allow mounting either over or under your ROPS bar. Fits bars up to 3"in width. Some wiring modifications required. Wire harness not included. Recommended for off-road use only. Includes: (2) 8302286 Coated U-Bolt Bracket
LED Headlights for Kubota Skid Steer. Uses Original Mount & Wiring. Includes: Connector and Stainless Steel Hardware.
Replaces Kubota Part Number: V1311-535210 (Left), V1311-535220 (Right)
TL910 Set of Right and Left. LED Rear light + amber flasher for Kubota Skid Steer. Uses Original Mount & Wiring. Includes: Connector and Stainless Steel Hardware. This light will bolt into the original mount on the skid steer. Replaces Kubota Part Number: V1311-53540. Includes right and left light (set). Ships from Tiger lights.
HP-4 Oval, 20°, 40° or 60° light. If used on the hanging cab lights on a "R"/20/30 series JD, please order the "R" series bracket. Also needed for the 60/70/S series combine cab lights. For Challenger tractors, the side mount bracket might be needed. Find those and adapter cables on the bottom of the page.
HP-4 is a 4" LED light made for use on most tractors where a square light is needed. 20, 40 or 60 degree light beam, 4366 lumens effective! Much brighter light than OEM LED lights! .
The RHP-4 is a 4" Round LED light made for use on most tractors where a round light is needed. 20, 40, or 60 degree light beam, 4366 lumens effective! Much brighter light than OEM LED lights! Find brackets and adapter cables on the bottom of the page.
This is the large high beam light in the grill (the center light of the 3 lights on each side) on the newer models of JD "R" series tractors. Includes rubber grommet.
The LED-504 series of lights are used on a lot of earth-moving equipment, they are great lights with a high output. Available in 3 beam patterns - 80°, 50°, and 15° spot beam. Compact mount design for mounting in tight spaces.
Plug & Play flush mount LED Light. Works with later model Case/IH Combines Common cab models with 8 lights on top of the cab. Direct replacement. Aluminum housing, Durable Poly-carbonate Lens. Replaces Part Numbers: Case/IH: 47430979, 47430977.
An oval LED-652 Hi-Lo or Flood LED light for some JD tractors and CaseIH combines. The Hi-Lo model fits in the hood on many newer JD tractors, and both the Hi-Lo and the Flood light fit some newer CIH combines. Replaces Case IH® Part Numbers: 87106352, 87106354. Replaces John Deere® Part Numbers: RE260102, RE173600.
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
LED-765 is a 4x6 style Oval LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5000-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-665.
"Solid" Mount Bracket LED-LED-760/765, for high vibration and JD 20/30 series tractors and 60/70 /"S" series combines, and many others using a 1 3/8" "U" clamp.
LED-7604 - 80°, 60°, 40° or 20° beam. This light is designed for use on the JD "R" series tractors, newer combines, and many others. 4800 effective lumen!
Front Light Mounting Kit - this kit is for the lower front cab lights on the Magnum Boxcars 71xx, 72xx, and 89xx models. If your mounts are gone / damaged, this kit will let you add the lower front cab lights. QTY 1 - order 2 sets if you need both the right and left side.
This upgraded replacement FUSE BLOCK provides a direct replacement for the OEM CARTRIDGE TYPE - round glass fuses - to modern ATO/ATC STANDARD BLADE FUSES.
LED-9652 Hi-Lo, LED Oval Headlight fits into the hood of John Deere Tractors. Uses OEM Mount and Wiring, Plug and Play. Replaces John Deere Part Number: RE181963, RE181964, RE205360
LED-6060 is an oval LED light for CIH combines and some JD tractors. Select from Hi-Lo beam or Flood beam. Replaces Case IH® Part Numbers: 87106352, 87106354. Replaces John Deere® Part Numbers: RE260102, RE173600. Effective Output: Low beam 2700 lumen, high beam / flood beam 5400 lumen.
LED-7501 is a light that matches the OEM lights on the JD Rx tractors. 5500 lumens each. Available in 40° and 60° beam type. Replaces OEM# RE593795, RE593796, RE593798
LED Hood Conversion Kit, LED-2755. The kit comes with a wire harness (plug and play), housing, billet, bezel, and all mounting hardware. Add your choice of light model.
LED Hood Conversion Kit for JD 4050,4250 and 4450. The kit comes with a wire harness (plug and play), housing, billet, bezel, and all mounting hardware. Add your choice of light model.
LED Hood Conversion Kit, LED-3010. The kit comes with a wire harness (plug and play), housing, billet, bezel, and all mounting hardware. Add your choice of light model.
LED Hood Conversion Kit, LED-4000. The kit comes with a wire harness (plug and play), housing, billet, bezel, and all mounting hardware. Add your choice of light model. For JD 4650 & JD 4850
LED Hood Conversion Kit, LED-4200. The kit comes with a wire harness (plug and play), housing, billet, bezel, and all mounting hardware. Add your choice of light model.
LED Hood Conversion Kit, LED-4600. The kit comes with a wire harness (plug and play), housing, billet, bezel, and all mounting hardware. Add your choice of light model.
Set of right and left headlight for CIH tractors, & Sprayers. This light has "centering bushings" that will center the lamp in the bezel. Please compare to your model before ordering.
LED-6075 Oval LED Light . This is a light similar to the Thomas HP-5 light, but 1000 lumens brighter at 6000 effective lm. Includes a pigtail wire for power. Select from 20° / 40° / 60° / 80° beam types. If used on a JD combine, please add adapter wire LL0451.
Set of right and left headlights for most of the 2008 and newer CIH tractors, & Sprayers. Now with a built-in side light for extra light to the sides. Replaces CIH part #87309029 & 87309030
LED-1201 - Headlight set for some T / TG models. Replace your old yellow halogen headlights with LED headlights - cheaper than new OEM halogen headlights, and much brighter. If you have some (2 or 4) OEM HID lights, you need adapter cable LL0593 to make the connection.
If you replace your stock flashers with LED flashers, you might need a new flasher relay or a set of resistors in order for the flashers to flash normally.
LED-2206 w/ built in resistor. Used on CaseIh, IH, FNH, Versatile/Buhler and more. Replaces OEM Part Numbers: 92185C1, 216044C91, 216044C92, 92260C1, 130882C91, 107324C91, V93104, V77050, 9706415, 86014019, 86023276, 86016518, 86012669, 87053368, 83977683, & 8770630.
LED-2417 amber with a built-in resistor. No need for special LED flasher relays! This model fits some CIH models - replaces OEM # 84269970, 84273385, 84273384
LED-486, Round stud mounted warning light for mounting onto fenders, and many other places where you need an amber warning light. 8.5 watt. Note - This light does not have a built-in flasher, they would require a flasher relay in order to flash, or installed in place of an existing flasher. Also - most older flasher relays will not work with this low-wattage turn signal, you will need flasher relay SKU LL0466 for the turn signal to work.
Amber LED Light for direct replacement, Plug & Play. Light will bolt right into factory light housing. Set of right and left amber light. The light has a built-in resistor to work with the original factory flasher. Replaces Case/IH Part Number: 279223A1 + 279224A1
LED Tail Light for John Deere Tractors. 3 wire light, including tail and stop light function. The eyelet is the ground, the brown wire is the tail light, and the yellow wire is for the stop light (if equipped). OEM Replacement: John Deere: AR78825, RE39223.
If you replace your stock flashers with LED flashers, you might need a set of resistors or a LED flasher relay in order for the flashers to flash normally. If possible use the LED flasher relay instead of the resistors. Find it further down on this page.
Set of 2 amber lights (right and left) for JD, NH, and more. Now with a built-in resistor for an easy install. OEM Part NH 86507530, JD RE39582, RE39581, RE39582, CIH 1983404C1.
TBL7 - Bracket for Gleaner combine lights, this bracket makes it possible to mount the LED-2388 light into the support bracket on some Gleaner combines.
TBL7 - Bracket for Gleaner combine lights, this bracket makes it possible to mount the LED-2388 Hi-Lo light into the support bracket on some Gleaner combines. The adapter wire converts the 3 wire light to the 2 wire Gleaner harness.
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
PAR-36 size replacement LED light, this model has a lens that looks like the halogen lights, makes it appear as OEM. 60° Flood Beam. 1400 lumen, 30 watt rated / 18 watt use.
Cable for connecting the Thomas HP and the LED-765 Oval / 760 Rectangular to tractors and combines that previously used a weather pack 2 pin connector.
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
Cable for connecting the Thomas HP and the LED-760/765 lights to tractors and combines that previously used a 9005 bulb. Newer JD (20, 30, and R series and S series combines + other brands where the light replaced used a 9005 bulb.
24 Watt Oval LED work light. Now includes H11 connector (same as 880 series bulb connector) so the light will plug and play on most tractors and combines using the same size light.
LED-765 is a 4x6 style Oval LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5000-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-665.
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
HD Wi-Fi Camera for Ipad / Android. For use with 12 volt DC power supply or 12 volt battery. Very easy to use. App name "JoyTrip". NOTE - might not work with Samsung phones.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.