Larsen LED for AGCO Combines

This kit will replace all the 4.5" halogen bulbs with LED PAR-36 bulbs. You get the 8 front lights (2 Trapezoid beam and 6 Flood beam) and 1 auger light.

Gleaner - R42 / R52 / R62 / R72 series combine light upgrade. Complete LED lights. (not the 1.5" ball mount style)

Larsen LED for Gleaner using a 1.5" ball mount - R42 / R52 / R62 / R72

Gleaner - R66 / R76 / S67 / S77 / S78 / S88 combine light upgrade kit. 11 lights included - add 4 more for all lights on the combine.

Gleaner - R65 / R75 series combine light upgrade. Note: You will have to file the opening in the cab a little larger for the lights to fit.

Larsen LED kit for CAT Lexion 500 series using Thomas LED lights. This kit will replace the 2 large top cab lights, the 4 front facing mirror bracket lights, the 2 side lights on the mirror bracket, and the unload auger light with the HP-4. Add more lights if needed. Note that some of the lights might be HID from the factory, we do not recommend replacing those, please call us if changes are needed. Wiring required - you will have to use included connectors.

Larsen LED kit for CAT Lexion 600 & 700 series using LED-4405 lights. This kit will replace the 4 front facing mirror bracket lights, the 2 side lights on the mirror bracket, unload auger light with the LED-4405, and the 2 lower cab high beam lights with the Thomas EHP-1. Add more lights if needed. Note that some of the lights might be HID from the factory, we do not recommend replacing those, please call us if changes are needed.

Larsen LED kit for CAT Lexion 600 & 700 series using Thomas LED lights. This kit will replace the 4 front facing mirror bracket lights, the 2 side lights on the mirror bracket, unload auger light with the RHP-4, and the 2 lower cab high beam lights with the EHP-1. Add more lights if needed. Note that some of the lights might be HID from the factory, we do not recommend replacing those, please call us if changes are needed.

Combo beam / Hi-Lo (most distance) light for Gleaner R65, R75, A65, A75, & A85. Check serial number break below in the fitments guide.

LED-2394 Combo beam / Hi-Lo or Flood beam light for Gleaner Rx2 series of combines. R42/52/62/72, MF8680. See serial number break in fitments section.

Combo beam/Hi-Lo or Flood beam light for Gleaner Rx2 series of combines. R42/52/62/72 early models and lower cab lights on all C / Rx2 using the 1.5" ball mount system. Please verify the serial number below in the fitments guide.

EHP-1 is a 3" LED light. 40 or 60 degree light beam, 2800 lumen effective ! Much brighter light than OEM LED lights ! AGCO PN # 72438177

PAR-36 size replacement LED light for the old style sealed beam halogen light. 5-watt CREE LED chips. Actual power use is around 18 watts, effective lumen around 1400, raw lumen around 2200.

4 x 6 style, 45 watt LED 60° flood light. Flood beam is made in the lens for a wider pattern than the 845-2. Standard bracket.

Headlight for the 9000 series CaseIH using 4 bolts to hold the light. Can also be used on some Gleaner combines for the un-load auger light.

LED-4014 - 25° Distance light or 60° flood flush mount cab Light. This light is a LED light for Challenger & Massey Ferguson tractors. Uses the original mounting bracket on the tractor. DT connectors included. Replaces OEM Part Numbers: 3786665m93, 3786664m92.

The LED-827 flood is an oval 27 watt 2100 lumen flood light that works well on smaller tractors and on combines for stubble, discharge, and auger light. Comes with a 2 pin DT male connector (male pins / female housing)

LED-6075 Oval LED Light . This is a light similar to the Thomas HP-5 light, but 1000 lumens brighter at 6000 effective lm. Includes a pigtail wire for power. Select from 20° / 40° / 60° / 80° beam types. If used on a JD combine, please add adapter wire LL0451.

LED-765 is a 4x6 style Oval LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5000-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-665.