Larsen LED Light kit made to fit JD S series combines. .
Note that the lights are BRIGHT - you have to adjust the lights you do not blind oncoming traffic at night.
LED light kit for JD S series combines, improve the light output by 200-300% or more compared to the OEM light kits.
The kits use either Thomas HP-4 (4300 lumen) or HP-5 (5000+ lumen) for the 4 oval top cab lights, HP-4 is the same size as OEM - HP-5 is a little larger.
LED light kit for JD S series combines, improve the light output by 200% or more compared to the OEM light kits. Includes the 8 stadium lights, lower cab stubble lights, discharge lights, and 1 auger light. The 4 x Thomas HP-4 lights for the cab are 4300 lumes each.
LED light kit for JD S series combines, this kit is for combines that have factory HID in the 4 round cab lights. Included are the 4 Thomas HP4 oval lights for the cab, but no replacement for the 4 smaller round lights. Also included lower cab stubble lights, discharge lights, and 1 auger light. The 4 x Thomas HP-4 lights for the cab are 4300 lumes each.
LED light kit for JD S series combines, improve the light output by 200% or more compared to the OEM light kits. Includes the 8 stadium lights, lower cab stubble lights, discharge lights, and 1 auger light. The 4 x Thomas HP-5 lights for the cab are 5000 lumes each.
LED light kit for JD S series combines, this kit is for combines that have factory HID in the 4 round cab lights. Included are the 4 Thomas HP-5 oval lights for the cab, but no replacement for the 4 smaller round lights. Also included lower cab stubble lights, discharge lights, and 1 auger light.
LED-665 is a 4x6 style Oval LED work light. 6 CREE LED's at 10 watt each, 4100 lumens, 5000k, and only 3.6 amp use. Select the light beam type, then select the bracket you need for your application. Comes with a 7" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom of this page.
The RHP-4 is a 4" Round LED light made for use on most tractors where a round light is needed. 40 degree light beam, 4366 lumens effective! Much brighter light than OEM LED lights! Narrow flood - more distance than the 60° flood. Find brackets and adapter cables on the bottom of the page.
The RHP-4 is a 4" Round LED light made for use on most tractors where a round light is needed. 60 degree light beam, 4366 lumens effective! Much brighter light than OEM LED lights! Find brackets and adapter cables on the bottom of the page.
RHP-4 bracket for S series combine cab lights . This bracket will let you mount the 4300 lumen Thomas LED RHP-4 light in place of the smaller round JD lights on the cab. 4 lights used on the combine - if the combine has factory HID, then those would be the 4 HID lights. To use the LED lights you will have to disconnect the ballast under the roof, and use the 12 volt power wire to feed the LED lights.
The LED-827 flood is an oval 27 watt 2100 lumen flood light that works well on smaller tractors and on combines for stubble, discharge, and auger light. Comes with an H11 / 880 series connector, this is the connector commonly used on this size light, and is the same connector as used on a 885 or 886 bulb. (880 series bulbs)
24 Watt Oval LED work light. Now includes H11 connector (same as 880 series bulb connector) so the light will plug and play on most tractors and combines using the same size light.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
LED-660 is a 4x6 style LED work light. 6 CREE LED's at 10 watt each, 4100 lumens, 5000k, and only 3.6 amp use. Select the light beam type, then select the bracket you need for your application. Comes with a 7" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom of this page.
LED-665 is a 4x6 style Oval LED work light. 6 CREE LED's at 10 watt each, 4100 lumens, 5000k, and only 3.6 amp use. Select the light beam type, then select the bracket you need for your application. Comes with a 7" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom of this page.
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
HD WiFi camera for Android phones and tablets, Ipad and Iphones.
Direct link to the phone or tablet, or use router and internet for long distance surveillance. *** DO NOT CONNECT TO A BATTERY CHARGER FOR POWER OR TESTING, ONLY USE A 12 V BATTERY ***