11454629
18" x 5 mm thick blade to fit the front gang on Krause Dominator 5 bolt. Pack of 1
$60.70
Krause
11446380
20" concave blade, .197" thick to fit 1 3/4" round axles. Used on Dominator 4850 series. Pack of 1
$46.19
11457312
20" x 5 mm thick blade to fit the front gang on Krause Dominator 5 bolt. Pack of 1
$66.35
11443299
22" x 6 mm thick blade to fit the front gang on Krause Dominator 5 bolt. Note: OEM is 5 mm thick. Pack of 1
$89.87
11448866
24" x 6 mm thick blade to fit the front gang on Krause Dominator 5 bolt. Note: OEM is 5 mm thick. Pack of 1
$106.04
11445396
This blade is 6 mm thick (approximately 1/4") and made of Boron steel. Pack of 1
$80.71
11444300
Bearing kit for rear disc blades on Krause Dominator 4850. Kit includes 2 bearings and 2 seals. Pack of 1
$113.79
11455249
Conservation Ripper Point with 10" wings for Case-DMI Ecolo Tiger with 1-1/4" shank Also Krause Dominator. Pack of 1
$260.30
11456928
Relube disc harrow bearing, riveted flange style, 1-3/4" round bore. Fits rear gang on Brent CPC and Earthquake™ rippers; late models with 4-bolt riveted flange. Great Plains Verti-Till models 4360A, 5300A, 6360A, 7225A, 7300A, 9225A. Krause-Kuhn ripper models 1740-1767, 2400-2495, 4995, 5812-5824. Also fits select models of Krause-Kuhn and International Harvester discs.Bolt Holes are for 1/2" bolts. Outside measurement of the flange is 5 1/2".Replaces a Fafnir no. DHU1-3/4R211. Pack of 1
$51.33
11422817
Point for Krause in-line ripper 4830 series.Made from a special Chrome Alloy for longer wear. Pack of 1
$125.16
11447787
Conservation Ripper Point with 7" wings.Case-IH disc rippers 527B, 690, 870, 875, MRX690; 2500 with curved parabolic or MRD shanks; 6750 parabolic.Front shanks only on 530B, 530C, 730B, 730C, 9300.DMI disc rippers500, 527, 527B, 900, 1000, 1300; 2500 with curved parabolic or MRD shanks.Front shanks only on 530, 530B, 530C, 730, 730B, 730C, 9300.Glencoe coulter chiselCC4450 with Deep Till shanks.New Holland disc rippersST720, ST740; ST650 with curved parabolic or MRD shanks.Front shanks only on ST770, ST775.Salford disc rippers9705, 9707, 9709, 9711, 9713, 9715, 9805, 9807, 9809, 9811, 9813 with curved parabolic shank.Sunflower disc rippers4610, 4630. Mount with RP12212 roll pin, order separately.White conservation chisel plows435, 445 with Deep Till shank. Pack of 1
$228.98
11330693
Shin for Krause in-line ripper 4830 series.Made from a special Chrome Alloy for exceptional wear. Pack of 1
$107.02
11457532
Wearbar assembly for Subsoiler shanks in the front of a Dominator. Pack of 1
$76.76
11445884
Wearbar assembly for Chisel shank on Dominator. (Rear shanks). Pack of 1
$79.77
11453061
Pair of Side plates for Krause Gladiator strip till units, 3/16" thick. For liquid fertilizer use only.The OEM number referenced is for 1 side only, we are selling them as a pair. Pack of 1
$30.95
11450374
Shank protector mounting hardware kit. Use on Krause Dominator rear shanks. U-bolt length is 5 3/4". Pack of 1
$12.81
11450171
Shank protector mounting hardware kit. Used on Krause Dominator front shanks; Sunflower 4010, 4110, 4301, 4311, 4410, 4411, 4412. Pack of 1
$12.81
19339828
Ripper Point, 7” to fit 1 1/4” shank. Fits Krause Dominator, DMI Colter Champ®II & II HD, 500, 527, 527B, 690, 870, 900, 1000, 1300, MRX690, ST720, ST740; 2500 and ST650 with curved parabolic or MRD shanks; 6750 parabolic. Front shanks only on 530, 530B, 530C, 730, 730B, 730C, 9300, ST770, ST775. Pack of 1
$217.11
36010934
Ripper Point, narrow (no wing) to fit 1 1/4” shank. Fits Krause Dominator, DMI Colter Champ®II & II HD, 500, 527, 527B, 690, 870, 900, 1000, 1300, MRX690, ST720, ST740; 2500 and ST650 with curved parabolic or MRD shanks; 6750 parabolic. Front shanks only on 530, 530B, 530C, 730, 730B, 730C, 9300, ST770, ST775. Pack of 1
$178.06
LL0001
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
$29.00
LED-760 series
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
$79.00
LL0032
Rubber grommet for the PAR-36 size lights. 3 tabs lock onto the OEM Hobbs housing. Not for the front fender lights. Replaces JD part# R42689.
$5.95
LL0449
Cable for connecting the Thomas HP and the LED-765 Oval / 760 Rectangular to tractors and combines that previously used a weather pack 2 pin connector.
$4.50
LL0451
Cable for connecting the Thomas HP and the LED-760/765 lights to tractors and combines that previously used a 9005 bulb. Newer JD (20, 30, and R series and S series combines + other brands where the light replaced used a 9005 bulb.
$3.50
LED-765 series
LED-765 is a 4x6 style Oval LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5000-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-665.
$79.00
LL0034
PAR-36 size rubber housing. Simple rubber housing with a steel mounting bracket. No rubber grommet needed.
$10.90
LL0021
27 Watt, 4" Round Led Flood work light. 60° Flood beam.
A very strong built light !
$26.00
HO Par-36
30 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. Available beam types are 60° flood, 40° beam, Hi-Lo beam, and Spot beam. This light has a chrome background, the picture does not show it well.
$36.00
LL0086
24 Watt Oval LED work light. Now includes H11 connector (same as 880 series bulb connector) so the light will plug and play on most tractors and combines using the same size light.
$27.45
LL0541
LED-91, amber with a built-in resistor. No need for special LED flasher relays! This model fits Sound guard cabs and older Steigers.
$33.00
LL0030
A steel housing with a single bolt for mounting in the fenders on some tractors. Rubber grommet included.
$19.00
LL0305
60 watt 4x6 size LED Headlight. Fits many tractors using a 4x6 headlight. JD 6000 and 7000 series tractors, 60 series JD, Older IH and many more.
$63.50
LL0004
PAR-36 size replacement LED light for the old style sealed beam halogen light. 20° Spot Beam. 1450 lumen, 30 watt rated / 18 watt use.
$27.00
LED-760 series
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
$79.00
LL1046
HD Wi-Fi Camera for Ipad / Android. For use with 12 volt DC power supply or 12 volt battery. Very easy to use. App name "JoyTrip". NOTE - might not work with Samsung phones.
$164.00
LL1045
Rechargeable HD Wi-Fi Camera for Ipad / Android - magnetic base. Very easy to use. NOTE - might not work with Samsung phones.
$184.00
LL0007
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$36.00
LL0006
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$36.00
LL0008
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$37.00
LL0001
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
$29.00
LL0022
4 x 6 style, 45 watt LED 60° flood light. Flood beam is made in the lens for a wider pattern than the 845-2. Standard bracket.
$44.00
LL0023
4 x 6 style, 45 watt LED 60° flood light. Light beam is created in the reflectors, and a clear lens is used for higher lumen output.
Standard bracket.
$44.00
LL0112
LED Hood Conversion Frame for JD 4050,4250 and 4450.
$99.90
LL0413
Headlight kit for Magnum Tractors. Includes Stainless Steel Hardware, Plug & Play. OEM Replacement. Replaces OEM Part Number: 91971C2 and 91972C2.
$219.00
LL0307
Set of right and left headlight for some CIH tractors, & Sprayers.
$259.00
LL0050
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
$69.50
