This kit will improve your lighting by changing the lights to LED. The "standard" option below is just fine for most uses. If you have larger implement, consider one of the other options for a wider and deeper light pattern.
Note that the Platinum kit might need a better power feed and relay if there are any flicker issues with the lights.
Replaces the work lights with LED lights, a total of 10 lights in the packet. The Standard kit uses the LED-660 floodlights on the rear fenders and the LED-660 trapezoid lights on the cab. Select complete headlights below if needed.
Replaces the work lights with LED lights, a total of 10 lights in the packet. The Silver kit uses the LED-60 floodlights on the rear fenders and the LED-660 trapezoid lights on the cab. Select complete headlights if needed.
Replaces the work lights with LED lights, a total of 10 lights in the packet. The Platinum kit uses the LED-90 floodlights on the rear fenders and the LED-660 trapezoid lights on the cab. Select complete headlights if needed. Note: The LED-90 use more amp than the OEM lights, we have not had any trouble with the STX using this kit, but if there is any flickering from the lights after install, you will need a better power source / better wires.
This kit is for the newer models with the new style headlights. Replaces the work lights with LED lights, a total of 8 lights in the kit. (4 rear fender, 4 rear cab) This kit uses the Oval LED-666 lights on the rear fenders and on the cab. Add the top cab side lights if needed, this is an option from the factory and not all models have them. If your tractor does not have them and you want to add them, you need the mount kit from CIH. (or make your own). Select the complete headlights / center grill lights or the LED-409 for replacing the center lights only. (3 or 6 lights needed depending on the model - wide or standard)
This kit is for the newer models with the new style headlights. Replaces the work lights with LED lights, a total of 8 lights in the kit. (4 rear fender, 4 rear cab) This kit uses the Rectangular LED-660 lights on the rear fenders and on the cab. Add the top cab side lights if needed, this is an option from the factory and not all models have them. If your tractor does not have them and you want to add them, you need the mount kit from CIH. (or make your own). Select the complete headlights / center grill lights or the LED-409 for replacing the center lights only. (3 o 6 lights needed depending on the model - wide or standard)
LED-660 is a 4x6 style LED work light. 6 CREE LED's at 10 watt each, 4100 lumens, 5000k, and only 3.6 amp use. Select the light beam type, then select the bracket you need for your application. Comes with a 7" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom of this page.
LED-665/666 is a 4x6 style Oval LED work light. 6 CREE LED's at 10 watt each, 4100 lumens, 5000k, and only 3.6 amp use. Select the light beam type, then select the bracket you need for your application. Comes with a 7" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom of this page.
Set of right and left headlight for CIH tractors, & Sprayers. Only for models that have the large single center light (2 on high HP STX - none on some sprayers). Not for newer models with the 3 single center lights in the grill. OEM part# 232449A2, 232451A2, 365842A1, 87429389, 232448A2, 232450A2, 365841A1, 87429390.
Set of right and left headlight for CIH tractors, & Sprayers. This light has "centering bushings" that will center the lamp in the bezel. Please compare to your model before ordering.
LED-1207 is the same light without the centering bushings. The "centering bushings" ($5) will be added to the cart with the lights.
LED-409A - a 40 watt, 15° beam LED light for the center grill lights on newer CaseIH tractors. 3 used for the MX / Magnum, and 6 for the large STX models. Also available as Flood beam. John Deere OEM Part Numbers: AL209455. Challenger OEM Part Numbers: 519438D1, 526701D1. CASE / IH OEM Part Numbers: 87539115, 87328621. Will bolt into CIH OEM light housing part #: 87455676, 87455677, 87308895.
LED-409A - a 40 watt, 40° beam LED light for the center grill lights on newer CaseIH tractors. 3 used for the MX / Magnum, and 6 for the large STX models. Also available as Spot beam. John Deere OEM Part Number: AL209455. Challenger OEM Part Numbers: 519438D1, 526701D1. CASE / IH OEM Part Numbers: 87539115, 87328621. Will bolt into CIH OEM light housing part #: 87455676, 87455677, 87308895.