4 x 6 style, 45 watt LED 60° flood light. The flood beam is made in the lens for a wider pattern than the 845-2. "Easy Mount Bracket" - this bracket will fit into a 1.25" "U" clamp, and can not be used unless installing into existing "U" clamp.
4 x 6 style, 45 watts LED flood light. The light beam is created in the reflectors, and a clear lens is used for higher lumen output.
"Easy Mount Bracket" - this bracket will fit into a 1.25" "U" clamp, and can not be used unless installing into existing "U" clamp.
LED Hood Conversion Kit for JD 4650 and 4850. Removes the old lights in the nosecone and replaces them with 4 x 20 watt LED lights. For JD 4650 & JD 4850
HP-2 is a 4" LED light made for use on most tractors and combines where a small square light is needed. 60 degree light beam, 3300 lumen effective ! Much brighter light than OEM LED lights !
LED-409A - a 40 watt, 40° beam LED light for the center grill lights on newer CaseIH tractors. 3 used for the MX / Magnum, and 6 for the large STX models. Also available as Spot beam. John Deere OEM Part Number: AL209455. Challenger OEM Part Numbers: 519438D1, 526701D1. CASE / IH OEM Part Numbers: 87539115, 87328621. Will bolt into CIH OEM light housing part #: 87455676, 87455677, 87308895.
Kit comes with Led lights, wire harness(plug and play), housing, billet bezel and all mounting hardware.Everything needed to convert your John Deere Tractor to LED Lighting. Tiger lights brand. For John Deere, 1640, 2040, 2140, 2150, 2155, 2240, 2255, 2350, 2355N, 2550, 2855N, 2940, 2950, 2955, 3040, 3055, 3140, 3150, 3155, 3255, 4030, 4040, 4230,
LED-845 - a 4 x 6 style, 45 watts LED 60° flood light. Connectors for the 44, 66, 77, and 88 series combines installed.
Use the 845 for stubble, auger, and rear lights - use the 845-2 for the side/row finder lights.
LED-845-2 - a 4 x 6 style, 45 watts LED flood light. Connectors for the 44, 66, 77, & 88 series CIH combines installed. Use the 845 for stubble, auger, and rear lights - use the 845-2 for the side/row finder lights.
The 845-2 has a more concentrated light beam than the 845, although still considered a flood light.
4 x 6 style, 45 watt LED 60° flood light. The flood beam is made in the lens for a wider pattern than the 845-2. "Easy Mount Bracket" - this bracket will fit into a 2" wide "U" clamp, and can not be used unless installing into existing "U" clamp.
4 x 6 style, 45 watts LED flood light. The light beam is created in the reflectors, and a clear lens is used for higher lumen output.
"Easy Mount Bracket" - this bracket will fit into a 2" "U" clamp, and can not be used unless installing into existing "U" clamp.
LED-9306 Right side LED Oval Corner Lights fits into the hood on some John Deere Tractors. Uses Original Mount and Wiring, Plug and Play. Replaces JD Part Number : RE205361, RE181916. If you are replacing an HID light, you will need adapter cable LL0591 x 2
LED-9306 Left Side, LED Oval Corner Lights fits into the hood on some John Deere Tractors. Uses Original Mount and Wiring, Plug and Play. Replaces JD Part Number : RE205361, RE181916. If you are replacing an HID light, you will need a new connector for your tractor, or an adapter - male 9005 to female H11 - please call if needed.
LED-2398 Flood beam light for Gleaner Rx2 series of combines. R42/52/62/72 early models and lower cab lights on all C / Rx2 using the 1.5" ball mount system. Please verify the serial number below.
LED-4060 Flood is used for the 20 and 30 series JD tractors and other machines. Replaces John Deere Part Numbers: RE271574, RE181282, RE180613, RE271573. Replaces Buhler/Versatile Part Numbers: 86034865, 86034864, 86038024.