Cable for connecting the Thomas HP and the LED-665 Oval / 660 Rectangular to tractors and combines that previously used a weather pack 2 pin connector.
Cable for connecting the Thomas HP and the LED-666 Oval / 660 Rectangular to tractors and combines that previously used a weather pack 2 pin connector.
Cable for connecting the Thomas HP and the LED-660/665 lights to tractors and combines that previously used a 9005 bulb. Newer JD (20, 30, and R series and S series combines + other brands where the light replaced used a 9005 bulb.
Cable for connecting the Thomas HP and the LED-660/665 lights to tractors and combines that previously used a 9005 bulb. This 15" adapter is needed if you are replacing OEM HID Xenon lights on the fenders of JD tractors where the ballast is inside the fender.
Cable for connecting the Thomas HP and the LED-660/665 lights to tractors and combines that previously used 2 pin DT connectors, but need an extension cable to reach the new light with the integrated connector.
Cable for connecting the Thomas HP and the LED-666 Oval / 660 Rectangular to tractors and combines that previously used 2 pin DT connectors, but need an extension cable to reach the new light with the integrated connector. 24 inches long.
Deutsch DT female compatible to DTM female 15" - mostly used on CIH sprayers for the lights mounted on the tank - right and left side, rear boom, and the fill station light. Used with the LED-660 / 665 and the Thomas lights.
Adapter 9005 female to H11 male . (9005 female pins, H11/880 male pins) Note H8 / H9 / H11 / 885 / 886 (all 800 series) all use the same connector type.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
LED-660 is a 4x6 style LED work light. 6 CREE LED's at 10 watt each, 4100 lumens, 5000k, and only 3.6 amp use. Select the light beam type, then select the bracket you need for your application. Comes with a 7" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom of this page.
LED-665 is a 4x6 style Oval LED work light. 6 CREE LED's at 10 watt each, 4100 lumens, 5000k, and only 3.6 amp use. Select the light beam type, then select the bracket you need for your application. Comes with a 7" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom of this page.
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
HD WiFi camera for Android phones and tablets, Ipad and Iphones.
Direct link to the phone or tablet, or use router and internet for long distance surveillance. *** DO NOT CONNECT TO A BATTERY CHARGER FOR POWER OR TESTING, ONLY USE A 12 V BATTERY ***