Search
You have no items in your shopping cart.
Larsen Lights
LED-7603
Plug & Play flush mount LED Light. Works with later model Case/IH Combines Common cab models with 8 lights on top of the cab. Direct replacement. Aluminum housing, Durable Poly-carbonate Lens. Replaces Part Numbers: Case/IH: 47430979, 47430977.
From $70.00
LED-7605F
LED-7605F, 40° or 60° light for the built-in cab lights on the "R" series JD tractors and sprayers. Amber model coming this fall.
From $83.00
LED-765 series
LED-765 is a 4x6 style Oval LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5000-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-665.
$76.00
LL0086
24 Watt Oval LED work light. Now includes H11 connector (same as 880 series bulb connector) so the light will plug and play on most tractors and combines using the same size light.
$31.45
LL0525
The LED-827 flood is an oval 27 watt 2100 lumen flood light that works well on smaller tractors and on combines for stubble, discharge, and auger light. Comes with an H11 / 880 series connector, this is the connector commonly used on this size light, and is the same connector as used on a 885 or 886 bulb. (880 series bulbs)
$25.00
LL0573
The LED-827 flood is an oval 27 watt 2100 lumen flood light that works well on smaller tractors and on combines for stubble, discharge, and auger light. Comes with a 2 pin DT male connector (male pins / female housing)
$36.00
LED-845-1.25"
4 x 6 style, 45 watt LED 60° flood light. The flood beam is made in the lens for a wider pattern than the 845-2. "Easy Mount Bracket" - this bracket will fit into a 1.25" "U" clamp, and can not be used unless installing into existing "U" clamp.
From $44.00
LED-845-Easy-2
4 x 6 style, 45 watt LED 60° flood light. The flood beam is made in the lens for a wider pattern than the 845-2. "Easy Mount Bracket" - this bracket will fit into a 2" wide "U" clamp, and can not be used unless installing into existing "U" clamp.
From $44.00
LED-845 series.
4 x 6 style, 45 watt LED 60° flood light. Flood beam is made in the lens for a wider pattern than the 845-2. Standard bracket.
From $44.00
LED-845-connectors-for-CIH44, 66, 77 series
LED-845 - a 4 x 6 style, 45 watts LED 60° flood light. Connectors for the 44, 66, 77, and 88 series combines installed.
Use the 845 for stubble, auger, and rear lights - use the 845-2 for the side/row finder lights.
From $44.00
LL0613
LED Light includes stainless steel hardware and connectors for Plug & Play.
Replaces OEM Part Number: TD170-75300.
$59.00
LL0305
60 watt 4x6 size LED Headlight. Fits many tractors using a 4x6 headlight. JD 6000 and 7000 series tractors, 60 series JD, Older IH and many more.
$63.00
LL0064
60 watt 4x6 size LED flood beam , fits many tractors using a standard 4x6 inch sealed beam flood light. No brackets included.
$62.00
LL0622
LED-8961 - 96 watt Hi-Lo for JD tractors and more. OEM part # (JD) RE229115, RE229111.
$74.00
LED-9000
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
From $63.00
LL0054
An LED replacement light for JD combines with the rectangular row finder light mounted in the grain tank on the right and left sides. The price is for one light. Updated model for better light aim, and easier install.
$66.00
LL0754
LED Headlights for Kubota Skid Steer. Uses Original Mount & Wiring. Includes: Connector and Stainless Steel Hardware.
Replaces Kubota Part Number: V1311-535210 (Left), V1311-535220 (Right)
$144.00
LL0541
LED-91, amber with a built-in resistor. No need for special LED flasher relays! This model fits Sound guard cabs and older Steigers.
$35.00
LL0565
LED-9102 Hi-Lo headlight with turn signal. Set of Right & Left.
$169.00
LL0625
LED-9127 Hi-Lo Heated LENS headlight with turn signal. Set of Right & Left.
$199.00
LL0325
LED Tail Light for John Deere Tractors. 3 wire light, including tail and stop light function. The eyelet is the ground, the brown wire is the tail light, and the yellow wire is for the stop light (if equipped). OEM Replacement: John Deere: AR78825, RE39223.
$33.00
LED-9301
LED-9301 - LED Corner Grill Lights, fits into the hood of 7600-7810 John Deere Tractors, and 4700, 4710, & 4720 Sprayers.
From $72.00
LED-9306
LED-9306, Oval Corner Lights fits into the hood on some John Deere Tractors. Uses Original Mount and Wiring, Plug and Play. Replaces JD Part Number : RE205361, RE181916. If you are replacing an HID light, you will need a new connector for your tractor, or an adapter - male 9005 to female H11. Note that this light is sold as an right and a left side light - you need to order both for a set.
From $71.00
LL0568
Set of right and left headlights for most of the 2008 and newer CIH tractors, & Sprayers. Now with a built-in side light for extra light to the sides. Replaces CIH part #87309029 & 87309030
$459.00
LL0650
Case IH Center light . For newer style CIH tractors, & Sprayers. Wide frame Steiger models use 2 of this light.
$399.00
LL0649
LED-9308 Wedges - install if the aim of the 9308 is too high - enough for 1 center grill light. This is only needed for a few Magnums, see pictures.
$9.00
LL0521
LED-9652 Hi-Lo, LED Oval Headlight fits into the hood of John Deere Tractors. Uses OEM Mount and Wiring, Plug and Play. Replaces John Deere Part Number: RE181963, RE181964, RE205360
$68.00
LL0410
Bobcat skid Steer Headlight, Plug & Play LED Light. Fits into original housing, right & left. Sold in pairs. Replaces Bobcat Part Numbers: 7259523, 7259524, 6718042, 6718043
$76.00
LL1024
Powerful magnet with 8mm mounting bolt and washers for easy camera mounting.
$18.00
LL0597
Par-36 "Guide" Glare Guard. OEM Part# R54047, R71234
$16.50
LL0030
A steel housing with a single bolt for mounting in the fenders on some tractors. Rubber grommet included.
$18.00
LL0334
The Par-36 light as a combo of the red taillight and white work light. 3 spades on the rear for power connections. 12 volt. Bulb number: 4409X, 4409 Replaces:
AC: 250301, 235583
CASE: A40855
IH: 371461R92 & FITS LIGHT 377102R92
MM: 10p1729, 10p2646, 20-7000652
Oliver: 103593A, 166406A, 20-7000652
White: 10P2646
$35.00
LL0032
Rubber grommet for the PAR-36 size lights. 3 tabs lock onto the OEM Hobbs housing. Not for the front fender lights. Replaces JD part# R42689.
$6.50
LL0034
PAR-36 size rubber housing. Simple rubber housing with a steel mounting bracket.
$8.00
LL0025
PAR-36 size replacement LED light, this model has a lens that looks like the halogen lights, makes it appear as OEM. 60° Flood Beam. 1400 lumen, 30 watt rated / 18 watt use.
$27.00
Par-36
PAR-36 size replacement LED light for the old style sealed beam halogen light. 5-watt CREE LED chips. Actual power use is around 18 watts, effective lumen around 1400, raw lumen around 2200.
$27.00
LL0004
PAR-36 size replacement LED light for the old style sealed beam halogen light. 20° Spot Beam. 1450 lumen, 30 watt rated / 18 watt use.
$10.00
LL0459
Metal Pole for the LED Beacons. The standard poles with internal power connector, that many tractors is born with, will also work.
$10.00
LL0460
Metal Pole for the LED Beacons. The standard poles with internal power connector, that many tractors is born with, will also work.
$10.00
LL0461
Metal Pole for the LED Beacons. The standard poles with internal power connector, that many tractors is born with, will also work.
$10.00
LL0462
Metal Pole for the LED Beacons. The standard poles with internal power connector, that many tractors is born with, will also work.
$10.00
LL1045
Rechargeable HD Wi-Fi Camera for Ipad / Android - magnetic base. Very easy to use. NOTE - might not work with Samsung phones.
$169.00
LL1027
Digital Wireless Receiver - for use with displays without wireless capabilities. Only for the "Larsen" brand standard definition wireless cameras.
$65.00
LL1004
HD CMOS REAR VIEW CAMERA,
IR-Cut technology, Built-in Microphone, 10g vibration test.
110° view. Infrared LEDs for night vision.
$69.00
LL1006
HD CMOS REAR VIEW CAMERA,
IR-Cut technology, Built-in Microphone, 10g vibration test.
65° view. Infrared LEDs for night vision.
$69.00
LL1005
HD CMOS REAR VIEW CAMERA,
IR-Cut technology, Built-in Microphone, 10g vibration test.
90° view. Infrared LEDs for night vision.
$69.00
LL1032
Extra wireless digital camera, 120° view, add up to a total of 4 cameras to the Larsen wireless monitors. Wireless means the video signal is transferred wirelessly from the camera to the monitor, the camera and monitor need 12 volt DC.
$104.00
LL1030
Extra wireless digital camera, 69° view, add up to a total of 4 cameras to the Larsen wireless monitors. Wireless means the video signal is transferred wirelessly from the camera to the monitor, the camera and monitor need 12 volt DC.
$104.00
LL1031
Extra wireless digital camera, 92° view, add up to a total of 4 cameras to the Larsen wireless monitors. Wireless means the video signal is transferred wirelessly from the camera to the monitor, the camera and monitor need 12 volt DC.
$104.00
VPM9002Q
Larsen Monitor VPM9002Q - 9 inch SD monitor - add camera(s) and cable(s) as needed.
$149.00
LL0073
TBL6 - 1.5" ball mount for Gleaner, this bracket makes it possible to mount the LED-2388 light on some Gleaner combines.
$13.00
LL0075
TBL7 - Bracket for Gleaner combine lights, this bracket makes it possible to mount the LED-2388 light into the support bracket on some Gleaner combines.
$8.00
LL0074
TBL7 - Bracket for Gleaner combine lights, this bracket makes it possible to mount the LED-2388 Hi-Lo light into the support bracket on some Gleaner combines. The adapter wire converts the 3 wire light to the 2 wire Gleaner harness.
$9.00
WP4
4 pin rectangular Weather Pack connector, male and female + pins AWG 14-16
$2.27
WP4S
4 pin square Weather Pack connector, male and female + pins AWG 14-16
$2.27
LL1021
Wi-Fi Pro Camera for Ipad / Android - Discontinued - online for info only
Direct link to the phone or tablet, or use router and internet for long-distance surveillance. *** DO NOT CONNECT TO A BATTERY CHARGER FOR POWER OR TESTING ONLY TO A 12 V BATTERY *** - For this camera (purchased after 10-01-2020). Please use the app XMEye” - download from the app store. Note: You might have to disconnect cellular data for the phone to find the camera. You can use XMeye, XMeye Pro, iCSee, iCSee Pro etc. apps for this camera
$214.00
LL1051
Extra wireless digital HD camera, 110° view, you can add up to a total of 4 cameras to the HDW700 wireless monitor. Wireless means the video signal is transferred wirelessly from the camera to the monitor, the camera and monitor need 12 volt DC. Note: This is only for use with the HDW700 wireless monitor.
$116.00