You have no items in your shopping cart.

Wi-Fi Pro Camera for Ipad / Android - Discontinued - online for info only

Wi-Fi Pro Camera for Ipad / Android - Discontinued - online for info only Direct link to the phone or tablet, or use router and internet for long-distance surveillance. *** DO NOT CONNECT TO A BATTERY CHARGER FOR POWER OR TESTING ONLY TO A 12 V BATTERY *** - For this camera (purchased after 10-01-2020). Please use the app XMEye” - download from the app store. Note: You might have to disconnect cellular data for the phone to find the camera. You can use XMeye, XMeye Pro, iCSee, iCSee Pro etc. apps for this camera
SKU: LL1021
Out of stock
$214.00
Notes:

All prices are USD. If imported into Canada/Internationally there will be brokerage costs collected by the carrier. Check the"Canada/World" link at the top of the page for more info.  Please note that Hy-Capacity items can not be shipped to Canada / International.

WIFI Pro Camera

 

WiFi camera for Android phones and tablets, Ipad, and Iphones.
Direct link to the phone or tablet, or use router and internet for long-distance surveillance.

You can use VMEyeSuper, XMeye, XMeye Pro, iCSee, iCSee Pro etc. apps for this camera

Note: You might have to disconnect cellular data for the phone to find the camera.

Not compatible with Fire tablets.

Forgot your wi-fi password for this model? : 12345678

  • 2MP/H.265 resolution - 1296p Max
  • Built-in WIFI signal, Digital, Interference Free;
  • No extra monitors: Supports iPhone, Andriod, and PC for video checking;
  • Can be added to the local network, supports remote monitoring;
  • Weatherproof level up to IP69K, special housing for heavy-duty application;
  • Anti Vibration;
  • Day/ night sensor for automatic adjustment ;
  • Wide power range: 12 and 24 VDC
  • View 120°
  • If an extension antenna is needed, use the "Male center pin in coax connector" type.

 

Instructions for Wi-Fi Pro Camera OLD version (ordered before 10-01-2020)

iPhone Instructions for new model  (ordered after 10-01-2020) 

Android Instructions for new model  (ordered after 10-01-2020)

For this camera (purchased after 10-01-2020), Please use the app "iCSee app or iCSeePro app” for iPhone and "XMEye" for android / iPhone- download from the app store. Or try vMEyeSuper if no luck with above.

Older models can use the "XMEye" for IOS and "Onvifer" for android

New cameras do not include a CD with CMS and Device manager software, please download here if needed : 

CMS

Device Manager

 

Download page

 

Connect 2 cameras at the same time Instructions

WIFI Pro Camera

 

WiFi camera for Android phones and tablets, Ipad, and Iphones.
Direct link to the phone or tablet, or use router and internet for long-distance surveillance.

You can use VMEyeSuper, XMeye, XMeye Pro, iCSee, iCSee Pro etc. apps for this camera

Note: You might have to disconnect cellular data for the phone to find the camera.

Not compatible with Fire tablets.

Forgot your wi-fi password for this model? : 12345678

  • 2MP/H.265 resolution - 1296p Max
  • Built-in WIFI signal, Digital, Interference Free;
  • No extra monitors: Supports iPhone, Andriod, and PC for video checking;
  • Can be added to the local network, supports remote monitoring;
  • Weatherproof level up to IP69K, special housing for heavy-duty application;
  • Anti Vibration;
  • Day/ night sensor for automatic adjustment ;
  • Wide power range: 12 and 24 VDC
  • View 120°
  • If an extension antenna is needed, use the "Male center pin in coax connector" type.

 

Instructions for Wi-Fi Pro Camera OLD version (ordered before 10-01-2020)

iPhone Instructions for new model  (ordered after 10-01-2020) 

Android Instructions for new model  (ordered after 10-01-2020)

For this camera (purchased after 10-01-2020), Please use the app "iCSee app or iCSeePro app” for iPhone and "XMEye" for android / iPhone- download from the app store. Or try vMEyeSuper if no luck with above.

Older models can use the "XMEye" for IOS and "Onvifer" for android

New cameras do not include a CD with CMS and Device manager software, please download here if needed : 

CMS

Device Manager

 

Download page

 

Connect 2 cameras at the same time Instructions

Product tags
Existing reviews
Initial review: darn handy, not perfect. I'd buy it again.
Guest 2/12/2018 10:40 PM
Other stuff you don't know you will need:
1. A 120V to 12V power converter.  I bought a waterproof 30-watt one off of Amazon for < $20.
2.  Magnet mount, unless you intend to bolt it to something permanent.
3.  However much wire it takes to get from 120V power to where you want to have the camera.

Stuff you might find handy to know:
1.  not only does it put out its own wifi signal to which you can connect your device (straight out of the box), it also can be hooked to your existing wifi network in the future (which would require an intermediate skill level to switch the settings over, but is possible)
2.  There's some sort of (RJ45?) single prong connector (which terminates in a 2-wire pigtail) for power.  Not sure if that is waterproof or not, guess we will find out.
3.  There's also an Ethernet jack Y'd off of the power harness.  Not sure if it does PoE or just wired data transfer.
4.  We aren't using the external antenna, just the one that comes in the box.  It works for at least 50 feet so far.

Pluses:
1.  Does what it says it does.  Puts out a wifi signal, you download an app, you can watch your camera relatively easy.  We use ours for loading the semi at the bin.
2.  Works out of the box.  You plug it in, the camera starts broadcasting.
3.  App setup is straightforward.  Instructions are adequate.


Minuses
1.  Recommended default (vMEyeSuper) camera viewing app wants to load an ad from the app creator every minute or so, which messes up the picture format and requires you to reopen the app to get the full picture back.  Which can be problematic if you are needing to see the camera at that time.
2.  There is a 1-3 second delay for video transmission.  So plan ahead, if, for example, you are loading your semi truck full.  I'm finding that annoying.
3. You can get a full-screen viewfield of a single camera with your iOS phone.  You can only get about a 60% of the full iPad screen view, with the default app.  In case you need the picture to be big.  

It's possible some of the app frustrations could be fixed with a different app without the ads and view limitations, and maybe part of that is the latency, too.

I'd buy it again, for loading trucks.  May be able to find a better value somewhere else, tech is always changing, but it does what it says it does and that works for me.
Was this review helpful? Yes No (9/0)
A manager responded to this review
The delay can be fixed in settings - change from smooth view to real time, and it will be a less than a second delay.  A new app works better - "XMEye"
Write your own review
*
*
  • Bad
  • Excellent
Customers who bought this item also bought
LL1024
Powerful magnet with 8mm mounting bolt and washers for easy camera mounting.
$18.00
LL1028
110 Volt Power Supply for Camera for use with WI-FI Pro and WI-FI HD cameras.
$12.00
LL1022
10' Corded antenna extension, now with a stronger magnetic base. For the Wi-Fi cameras and others. Male center pin in coax connector - SMA Male.
$20.00