Light kit for the Case / CIH xx94 series tractors. This kit includes 2 headlights, 2 front top cab lights, 2 rear fender lights. Add more lights if needed. Note that you will need to make your own electrical connections as we do not have the style used on this model.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 20° Spot Beam
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° trapezoid beam
Replaces all standard lights with the LED-845 series lights, a total of 8 lights in the packet. This packet is great if running smaller implement under 40'. Add headlights and extra front grill sidelights if needed.
Replaces all standard lights with LED lights, a total of 8 lights in the packet. Keep in mind that the LED-90 uses 6.3 amp, 1.5 amp more than a standard 55 watt halogen light.
Replaces the work lights with LED lights, a total of 10 lights in the packet. The Platinum kit uses the LED-90 floodlights on the rear fenders and the LED-660 trapezoid lights on the cab. Select complete headlights if needed. Note: The LED-90 use more amp than the OEM lights, we have not had any trouble with the STX using this kit, but if there is any flickering from the lights after install, you will need a better power source / better wires.
Replaces the work lights with LED lights, a total of 10 lights in the packet. The Silver kit uses the LED-60 floodlights on the rear fenders and the LED-660 trapezoid lights on the cab. Select complete headlights if needed.
Replaces the work lights with LED lights, a total of 10 lights in the packet. The Standard kit uses the LED-660 floodlights on the rear fenders and the LED-660 trapezoid lights on the cab. Select complete headlights below if needed.
This kit is for the newer models with the new style headlights. Replaces the work lights with LED lights, a total of 8 lights in the kit. (4 rear fender, 4 rear cab) This kit uses the Oval LED-666 lights on the rear fenders and on the cab. Add the top cab side lights if needed, this is an option from the factory and not all models have them. If your tractor does not have them and you want to add them, you need the mount kit from CIH. (or make your own). Select the complete headlights / center grill lights or the LED-409 for replacing the center lights only. (3 or 6 lights needed depending on the model - wide or standard)
This kit is for the newer models with the new style headlights. Replaces the work lights with LED lights, a total of 8 lights in the kit. (4 rear fender, 4 rear cab) This kit uses the Rectangular LED-660 lights on the rear fenders and on the cab. Add the top cab side lights if needed, this is an option from the factory and not all models have them. If your tractor does not have them and you want to add them, you need the mount kit from CIH. (or make your own). Select the complete headlights / center grill lights or the LED-409 for replacing the center lights only. (3 o 6 lights needed depending on the model - wide or standard)
LED-665/666 is a 4x6 style Oval LED work light. 6 CREE LED's at 10 watt each, 4100 lumens, 5000k, and only 3.6 amp use. Select the light beam type, then select the bracket you need for your application. Comes with a 7" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom of this page.
LED-845 - a 4 x 6 style, 45 watts LED 60° flood light. Connectors for the 44, 66, 77, and 88 series combines installed.
Use the 845 for stubble, auger, and rear lights - use the 845-2 for the side/row finder lights.
LED-845-2 - a 4 x 6 style, 45 watts LED flood light. Connectors for the 44, 66, 77, & 88 series CIH combines installed. Use the 845 for stubble, auger, and rear lights - use the 845-2 for the side/row finder lights.
The 845-2 has a more concentrated light beam than the 845, although still considered a flood light.
Rubber grommet for the PAR-36 size lights. 3 tabs lock onto the OEM Hobbs housing. Not for the front fender lights. Need a front fender glare guard grommet ? Find it here : https://www.steinertractor.com/ABC3044-Guide-Glare-Guard-Rubber-Light-Bezel
PAR-36 size replacement LED light for the old style sealed beam halogen light. 5 watt CREE LED chips. Actual use is around 18 watt, effective lumen around 1450, raw lumen around 2200. 60° Flood Beam. 1450 lumen, 30 watt rated / 18 watt use. 60° flood.
PAR-36 size replacement LED light, this model has a lens that looks like the halogen lights, makes it appear as OEM. 60° Flood Beam. 1400 lumen, 30 watt rated / 18 watt use.