Show All Products
11444186
Open top guard for center overlap on Agco DynaFlex. Pack of 1
$39.42
11460416
12" 47 degree bolt-on sweep, 1/4" thick. Has 2 7/16" bolt holes on a 1.75" hole spacing (center to center). Pack of 1
$17.62
11459918
This is a 12" sweep used for Row Crop Cultivators and also on AC field cultivators. Has two 7/16" bolt holes on a 2" spacing and is 1/4" thick. Pack of 1
$20.28
11447296
12" Chisel plow sweep, 1/4" thick. Has (2) 1/2"bolt holes on 2.25" centers. Pack of 1
$21.28
11444091
13' AC 2 section reel that currently uses the "U-bolt" style reel bearing (Poly bushing).*Strongest Reel Available*Fingers use the patented "Gentle Finger" design.*Fingers are guaranteed one year against breakage.*Replaces Wood Bat Reels, Tear Drop Reels, and OEM Pipe Reels.*Comes with all new bearings and hardware. Pack of 1
$823.85
11449174
*Strongest Reel Available*Fingers use the patented "Gentle Finger" design.*Fingers are guaranteed one year against breakage.*Replaces Wood Bat Reels, Tear Drop Reels, and OEM Pipe Reels.*Comes with all new bearings and hardware. Pack of 1
$823.85
11446192
13 Wave x 16" diameter, 3/4" cutting width, .177" thick. 5 hole pattern 4 3/4" bolt circle, 2 1/8" center hole.Fits John Deere MaxEmerge®2, MaxEmerge®Plus, Pro-Series, MaxEmergeXP, Pro-SeriesXP, MaxEmerge5, ExactEmerge planters; 1530, 1535 drills. Pack of 1
$26.88
11454833
*Strongest Reel Available*Fingers use the patented "Gentle Finger" design.*Fingers are guaranteed one year against breakage.*Replaces Wood Bat Reels, Tear Drop Reels, and OEM Pipe Reels.*Comes with all new bearings and hardware. Pack of 1
$950.59
11449854
13-1/2" JD opener assembly for double disc fertilizer units mounted to the face of the row unit, complete with dust cap. (Has heavy cast hub.). Pack of 1
$63.82
11443674
13.5" Fertilizer opener assembly for double disc fertilizer Units mounted to the tool bar on John Deere 7000 and 7200 series planters. Has heavy cast hub and bearing. Pack of 1
$57.42
11447774
13.5" Seed opener assembly for Great Plains grain drills. Has 4 mm thick blade and a heavy 205 series bearing. Comes complete with dust cap. 2 required per row. Pack of 1
$42.74
11449056
Plow share to fit John Deere HS or NU bottoms. **Sold 6 per carton only. Made by Wiese Industries in the USA. Pack of 1
$34.94
11449048
14" opener assembly for Case-IH planters 800, 900, 950, 955; 1200 series and 5200, 5300, 5400, 5500, 6300 drills, LH (leading). Heavy 3.5 mm blade and 204 series bearing. Does NOT work on 510, 5100, 620, 6200 that uses 203 series bearings.Does NOT include dust cap. Pack of 1
$40.86
11459614
14" opener assembly for Case-IH planters 800, 900, 950, 955; 1200 series and 5400, 5500 drills, trailing - with offset openers. Heavy 3.5 mm blade and 204 series bearing. Does NOT work on 510, 5100, 620, 6200 that uses 203 series bearings.Does NOT include dust cap. Pack of 1
$40.86
11971566
14” opener assembly for Case-IH planters, trailing. Heavy 3.5 mm blade and Heavy duty single row bearing. Fits Case-IH planters 800, 900, 950, 955; 1200 series. 5400, 5500 Soybean Special. New Holland SP280, SP380, SP480, SP580. Replaces CIH number 84268573. Pack of 1
$45.10
11451157
14" opener assembly for Case-IH planters, leading. Heavy 3.5 mm blade and heavy duty bearing. Fits Case-IH planters 800, 900, 950, 955; 1200 series. 5400, 5500 Soybean Special. New Holland SP280, SP380, SP480, SP580. *Does NOT include dust cap. Pack of 1
$45.10
11451573
POLY UHMW moldboard for HS series 14" bottoms. **Made in the USA. Pack of 1
$143.77
11443687
14" Chisel plow sweep, 1/4" thick. Has (2) 1/2"bolt holes on 2.25" centers. Pack of 1
$26.35
11451269
14.9" diameter blade to fit Yetter, GP, Ausherman, Kinze 4 bolt & others. This blade is .177" thick. Pack of 1
$32.87
11453063
This is a 14" sweep used for Row Crop Cultivators. Has two 7/16" bolt holes on a 2" spacing and is 1/4" thick. Pack of 1
$27.76
11441696
*Strongest Reel Available*Fingers use the patented "Gentle Finger" design.*Fingers are guaranteed one year against breakage.*Replaces Wood Bat Reels, Tear Drop Reels, and OEM Pipe Reels.*Comes with all new bearings and hardware. Pack of 1
$950.59
11436573
15" Diameter, 7/8" cut, 13 wave coulter to fit Yetter and White no-till coulter assemblies. Blade is .177 thick (7 gauge). Has a 4" center hole and 4 bolt holes on a 5-1/4" bolt circle. Pack of 1
$42.11
11462406
15" opener assembly with bearing, 3.0 mm thick, boron steel blade. Pack of 1
$35.08
11446564
15" opener assembly to fit John Deere planters with XP row units. Uses a 3.5mm blade and a double row ball bearing. Fits John Deere planter models 1530, 1535, 1700, 1710, 1720, 1730, 1750, 1760, 1770, 1780, 1790 with MaxEmerge™ XP and XP Pro row units (from 2004, seed drill s/n 710000 and higher); MaxEmerge™ 5, ExactEmerge™. John Deere seed drills 1530, 1535 with MaxEmerge™ XP. Sold with dust cap. Pack of 1
$29.81
11455529
15” disc opener with 205 series bearing with 3/4” hole, 4 mm thick blade. Fits early model drills built prior to 1999 with heavy duty 15 series openers. Fits early model planter row units built prior to 1999. Replaces Great Plains No 404-007S, 404-061S, 404-089S. Sold with dust cover. Pack of 1
$46.92
11449573
Seed disc opener, 3.5 mm thick blade and 204 series import bearing. Blade is made of super tough boron steel. For John Deere MaxEmerge, MaxEmerge®2, MaxEmerge®Plus, Pro-Series; 1530, 1535 drills with MaxEmerge®Plus units.Kinze® planters (standard equipment on 3000, 4000 series).Fits White 6000-8000 series. Pack of 1
$32.20
11450069
*Strongest Reel Available*Fingers use the patented "Gentle Finger" design.*Fingers are guaranteed one year against breakage.*Replaces Wood Bat Reels, Tear Drop Reels, and OEM Pipe Reels.*Comes with all new bearings and hardware. Pack of 1
$950.59
11438147
*Strongest Reel Available*Fingers use the patented "Gentle Finger" design.*Fingers are guaranteed one year against breakage.*Replaces Wood Bat Reels, Tear Drop Reels, and OEM Pipe Reels.*Comes with all new bearings and hardware. Pack of 1
$1,096.82
11439693
*Strongest Reel Available*Fingers use the patented "Gentle Finger" design.*Fingers are guaranteed one year against breakage.*Replaces Wood Bat Reels, Tear Drop Reels, and OEM Pipe Reels.*Comes with all new bearings and hardware. Pack of 1
$1,393.94
11460404
*Strongest Reel Available*Fingers use the patented "Gentle Finger" design.*Fingers are guaranteed one year against breakage.*Replaces Wood Bat Reels, Tear Drop Reels, and OEM Pipe Reels.*Comes with all new bearings and hardware. Pack of 1
$1,169.96
11457921
*Strongest Reel Available*Fingers use the patented "Gentle Finger" design.*Fingers are guaranteed one year against breakage.*Replaces Wood Bat Reels, Tear Drop Reels, and OEM Pipe Reels.*Comes with all new bearings and hardware. Pack of 1
$1,206.51
11449863
15" Narrow cut Vortex with small pilot hole. Used to custom make bolt patterns. Pack of 1
$36.41
11459227
15" Blade to fit Yetter, GP, White, Kinze 4 bolt. Cuts approximately 1/2" wide. 4 mm thick.4 bolt holes to fit both 5" Bolt circles and 5 1/4" bolt circles. Pack of 1
$36.41
11457530
*Strongest Reel Available*Fingers use the patented "Gentle Finger" design.*Fingers are guaranteed one year against breakage.*Replaces Wood Bat Reels, Tear Drop Reels, and OEM Pipe Reels.*Comes with all new bearings and hardware. Pack of 1
$1,013.94
11452951
16", 13 Wave coulter, 1" cut to fit John Deere 6 bolt AND John Deere 5 bolt hole patterns. This blade is .177 thick (7 gage). Fits models 7000, 7100, 7200, 7300, 1700 and newer. Pack of 1
$26.98
11450943
16" 13 wave coulter, 3/4" cut, to fit White, Yetter, Kinze 4 bolt, and Great Plains. Blade is .177 thick (7 gage). Has 4" center hole and 4 bolt holes on 5 1/4" bolt circle. Pack of 1
$28.10
11442083
16" 13 Wave, 1" cut. Fits Yetter, White, Great Plains, and 4 bolt Kinze. Blade is .177" thick (7 gauge). Made of Boron steel. Has 4 bolt holes on 5 1/4" circle. Has 4" center hole. **Picture may not show correct bolt pattern**. Pack of 1
$26.98
11347564
16" 25 shaft coulter, fits all John Deere no-till coulter arms. Fits both 5-bolt and 6-bolt arms. The blade is 0.177" thick and made of boron steel. Pack of 1
$32.68
11453131
16" 25 wave coulter to fit Yetter, Ausherman, and Kinze 4 bolt coulter assemblies. Has 4" center hole and 4 bolt holes on 5 1/4" bolt circle. This blade is .177" thick. Made of Boron steel. Pack of 1
$33.48
11447684
**Hardfaced deep suck plow share, 16"4 bolt used on Oliver bottoms.Made by Wiese Corporation in the USA. Sold in cartons of 6 only.**this item is shipped from Perry, Iowa and may require additional freight. Pack of 1
$69.05
11462010
Oliver/White16" 4 bolt plow share. Made in the USA by Wiese Industries. Also used on Ford with White bottoms. The front bolt hole is for a 1/2" clipped head bolt, the other 3 bolts are for 7/16" clipped head bolts.**Comes 1 per box. Hardware is sold separately. Pack of 1. Picture show right hand - for info only.
$34.64
11454457
Oliver/White16" 4 bolt plow share. Made in the USA by Wiese Industries. Also used on Ford with White bottoms. The front bolt hole is for a 1/2" clipped head bolt, the other 3 bolts are for 7/16" clipped head bolts.**Comes 1 per box. Hardware is sold separately. Pack of 1
$34.94
11454525
16" Bubble Coulter blade to fit all John Deere 6 bolt and John Deere 5 bolt coulter assemblies. 4 mm thick (.157") made of super tough Boron Steel. Fits John Deere MaxEmerge™, MaxEmerge©2, MaxEmerge©Plus, Pro, XP, XP Pro; 1530, 1535.Replaces John Deere no.'s A46665, A72360, A24997.** Actually measure 15.86" to match JD no. A46665 & A72360. Pack of 1
$26.98
11452765
16" plain edge disc blade cut to most hole sizes. This blade is 11 gauge (.118")thick and made of super tough Boron steel. Please specify the center hole based on the size of your disc arbor bolt. The hole will be cut 1/16" over the size of your arbor bolt.The concavity is 1.5". Pack of 1
$34.66
11451084
16" plain edge disc blade cut to most hole sizes. This blade is9 gauge (.138")thick and made of super tough Boron steel. Please specify the center hole based on the size of your disc arbor bolt. The hole will be cut 1/16" over the size of your arbor bolt.Concavity is 1.5". Pack of 1
$35.76
11445885
16" Plain edge coulter to fit Kinze 4 bolt and Yetter bolt patterns. Double punched for 4 hole, 5" bolt circle or 4 hole, 5-1/4" bolt circle. 4.5 mm (.177") thick. Pack of 1
$36.29
11451063
16" Plain edge coulter to fit JD 5 bolt and JD 6 bolt patterns. 4.5 mm (.177") thick. Pack of 1
$28.16
11441499
16" fluted coulter to fit John Deere 5 bolt and 6 boltcoulter arms. Originally designed for planters but will work on other John Deere products. Blade is .177" thick and made of Boron steel. Pack of 1
$31.57
11458731
16" fluted coulter with 4 bolt holes to fit Yetter, White, Ausherman, Great Plains, and others. Blade is .177" thick. Made of Boron steel. Pack of 1
$29.33
11453940
16” notched coulter, fits Crustbuster All Plant 3400, 4000, 4025, 4030, 4615, 4620, 4740, and 4745. Center hole is 1 3/8” round. Pack of 1
$45.57
11447458
16” plain edge coulter, fits Crustbuster All Plant 3400, 4000, 4025, 4030, 4615, 4620, 4740, and 4745. Center hole is 1 3/8” round. Pack of 1
$49.89
11446785
16" Blade for Hiniker Air Seeder, .177 thick. 4 1/2" bolt holes on a 4" bolt circle. Center hole is 2.5". Pack of 1
$41.79
11445488
16" Single disc fertilizer opener blade, .197" thick. 3-1/2" bolt circle, 2-1/2" center hole. Fits all models except early 1770NT and 1790.Made in the USA out of the finest Boron steel available.Mounts with 8 mm x 25 mm hex bolt and an 8 mm hex nut. Pack of 1
$29.22
11452261
16" Single disc fertilizer opener blade, .197" thick. 4-3/32" bolt circle, 3-3/16" center hole. Fits early 1770NT and 1790.Made in the USA out of the finest Boron steel available.Mounts with 8 mm x 25 mm hex bolt and an 8 mm hex nut. Pack of 1
$31.67
11436579
16" Chisel plow sweep, 5/16" thick. Has (2) 1/2"bolt holes on 2.25" centers. Pack of 1
$38.93
11444895
Fluted coulter that can be can any bolt pattern cut into. Pack of 1
$45.88
11441296
16" Chisel plow sweep, 1/4" thick. Has (2) 1/2"bolt holes on 2.25" centers. Pack of 1
$35.02
11978047
16” Blade to fit Yetter, GP, White, Kinze 4 bolt. Cuts approximately 1/2” wide. Double punched for 4 hole, 5” bolt circle or 4 hole, 5-1/4” bolt circle. Now in 5 mm thick. Pack of 1
$47.85
11460606
16" Chisel plow sweep, 1/4" thick. Has (2) 1/2"bolt holes on 2.25" centers. Pack of 1
$26.46
11457734
16" Vortex coulter for all John Deere no-till coulter arms (5 bolt and 6 bolt). Pack of 1
$47.85
11450277
This is a 16" sweep used for Row Crop Cultivators. Has two 7/16" bolt holes on a 2" spacing and is 1/4" thick. Pack of 1
$31.95
11441067
17" 13 wave coulter to fit AC and DA planters. Full 1" cut. Blade is .177" thick (7 gauge). Has 6 bolt holes on 3.25" circle.** The bolt pattern in this blade is cut from a Pilot blade, may delay shipping by 1 day. Pack of 1
$52.49
11443573
17", 1" cut, 13 wave coulter to fit IH coulter arms. This is a 6 bolt pattern with a rectangular center hole. 6 bolt holes on a 3 1/4" circle (center of holes).Center hole is 31/32" x 1-11/32" rectangular. Pack of 1
$52.49
11452854
17" diameter, 13 wave coulter to fit Great Plains, Tye, IH, and other grain drills. Cuts 1" width. Has a 4" Center hole. Fits both 5" and 5-1/4" bolt circle. Has 4 bolts holes for 1/2" bolts. Pack of 1
$28.16
11442601
17" diameter, 13 wave coulter to fit Great Plains, Tye, IH and other grain drills. Cuts 3/4" width. Has a 4" Center hole and 5-1/4" bolt circle. Has 4 bolts holes for 1/2" bolts. Pack of 1
$28.16
11448267
17" 1" cut, 13 wave coulter to fit Rawson no-till coulter assemblies. Blade has 6 bolt holes and is .197" thick. Made of Boron steel.Center hole is 3-13/16"6 bolt holes on a 5" bolt circle. Pack of 1
$38.73
11447469
17" diameter, 25 wave coulter to fit Great Plains, Tye, IH, and other grain drills. Cuts 5/8" width. Has a 4" Center hole and 5-1/4" bolt circle. Has 4 bolts holes for 1/2" bolts. Pack of 1
$48.20
11460006
17" 25 wave coulter to fit Rawson. Blade is .177" thick. Pack of 1
$51.38
11450453
Blade with pilot hole, can be cut to most bolt patterns for an additional fee. Pack of 1
$51.38
11440687
17" fluted coulter with special punching to fit Blu-Jet, Crustbuster, Great Plains, Case-IH 5400, John Deere 1570, Landoll, Sukup/Marliss, Tye, Yetter, and others. Blade is .177" thick and made of super tough Boron steel. Excellent quality blade.17" diameter, 5/16" wide, .177" thick. 4 hole pattern, 4" center hole, slotted holes to fit both 5" and 5-1/4" bolt circle. Pack of 1
$41.07
11442164
17" fluted coulter to fit Rawson no-till coulter units. This blade is an extra heavy .197" thick for longer wear. Has 6 bolts holes and made of boron steel. Pack of 1
$51.62
11451365
17" x 2" wide, eight wave blade to fit Rawson coulter hubs. Made of boron steel and is .197" thick. Pack of 1
$58.62
11450455
17" diameter, 8 wave, 5 mm thick (.197”) coulter blade to fit Salford, Yetter, Great Plains, Ausherman, DMI, and others. Center hole measures 4”. 4 elongated bolt holes fit both 5” and 5-1/4” bolt circles. Pack of 1
$69.68
11401000
17" fluted coulter to fit Allis Chalmers moldboard plows. The center hole is 1 13/16". It has 6 bolt holes on a 3.25" bolt circle. The thickness is .157". Pack of 1
$47.33
11453945
17" fluted coulter to fit Massey Ferguson plows. This blade is .157" thick. The center hole is 3.172" and there are 4 bolt holes on a 4.75" bolt circle. Pack of 1
$47.33
11453951
17" fluted coulter to fit older IH plows. Has a rectangular center hole and 6 bolt holes on a 3.25" bolt circle. Blade is .157" thick. Pack of 1
$41.07
11457030
17" fluted coulter. Fits Ford 6 bolt patterns. Pack of 1
$47.33
11457225
17" fluted coulter. Fits all John Deere 6 bolt and John Deere 5 bolt hole patterns. Used on all John Deere moldboard plows. Our blade is .177" (4.5 mm) thick and made of Boron steel for longer wear. Pack of 1
$41.07
11453854
Ford 4 bolt coulter. 17" diameter. .157 thick. Pack of 1
$47.33
11449851
This blade can have most hole patterns cut into it. Pack of 1
$47.33
11459718
17" notched replacement coulter to fit 4 bolt patterns on Yetter, DMI, Blue Jet, Great Plains, Oliver, and others. Has a 4" center hole and 4 bolt holes for 1/2" bolts. The bolt circle accomodates both a 5" bolt circle and a 5-1/4" bolt circle. Pack of 1
$39.90
11442278
17" notched coulter to fit older John Deere plows. This blade is .177" thick and has a 2" center hole and 6 bolt holes on a 3.5" bolt circle. Pack of 1
$45.79
11456541
17" notched opener for Kinze® 2000 and early 3000 series. 17" diameter; 5/16" diameter bolt holes; 1-9/16" center pilot hole. Pack of 1
$51.33
11456249
Notched fertilizer blade. Fits late Kinze® 3000 series. 17" diameter; 3/8" bolt holes: 2" center pilot hole. Pack of 1
$34.04
11447681
The bolt pattern on this blade is cut from a "Pilot blade" so it may require additional lead time. Pack of 1
$47.33
11448274
17" VortexCoulter to fit Great Plains and Tye grain drills also fits the 4 bolt Yetter bolt pattern. The design of this blade is very similar to the coulter manufactured by Osmundson Manufacturing and sold by Great Plains. Fits Great Plains, Ausherman, Case-IH 5400, John Deere 1570, Yetter, Krause, Tye, Blu-Jet, Crustbuster, Sukup Marliss, DMI, Kinze, Shoup, White.CFC Distributors Inc. has no relationship of any kind with Osmundson Mfg. Co. Pack of 1
$55.75
11444092
Disc blade, 18" x 7 ga. to fit disc with1-1/2" square axles. This blade has a concavity of 1.75" and is made of boron steel. Pack of 1
$43.96
LL0001
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
$29.00
LED-760 series
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
$79.00
LL0032
Rubber grommet for the PAR-36 size lights. 3 tabs lock onto the OEM Hobbs housing. Not for the front fender lights. Replaces JD part# R42689.
$5.95
LL0449
Cable for connecting the Thomas HP and the LED-765 Oval / 760 Rectangular to tractors and combines that previously used a weather pack 2 pin connector.
$4.50
LL0451
Cable for connecting the Thomas HP and the LED-760/765 lights to tractors and combines that previously used a 9005 bulb. Newer JD (20, 30, and R series and S series combines + other brands where the light replaced used a 9005 bulb.
$3.50
LED-765 series
LED-765 is a 4x6 style Oval LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5000-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-665.
$79.00
LL0034
PAR-36 size rubber housing. Simple rubber housing with a steel mounting bracket. No rubber grommet needed.
$10.90
LL0021
27 Watt, 4" Round Led Flood work light. 60° Flood beam.
A very strong built light !
$26.00
HO Par-36
30 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. Available beam types are 60° flood, 40° beam, Hi-Lo beam, and Spot beam. This light has a chrome background, the picture does not show it well.
$36.00
LL0086
24 Watt Oval LED work light. Now includes H11 connector (same as 880 series bulb connector) so the light will plug and play on most tractors and combines using the same size light.
$27.45
LL0541
LED-91, amber with a built-in resistor. No need for special LED flasher relays! This model fits Sound guard cabs and older Steigers.
$33.00
LL0030
A steel housing with a single bolt for mounting in the fenders on some tractors. Rubber grommet included.
$19.00
LL0305
60 watt 4x6 size LED Headlight. Fits many tractors using a 4x6 headlight. JD 6000 and 7000 series tractors, 60 series JD, Older IH and many more.
$63.50
LL0004
PAR-36 size replacement LED light for the old style sealed beam halogen light. 20° Spot Beam. 1450 lumen, 30 watt rated / 18 watt use.
$27.00
LED-760 series
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
$79.00
LL1046
HD Wi-Fi Camera for Ipad / Android. For use with 12 volt DC power supply or 12 volt battery. Very easy to use. App name "JoyTrip". NOTE - might not work with Samsung phones.
$164.00
LL1045
Rechargeable HD Wi-Fi Camera for Ipad / Android - magnetic base. Very easy to use. NOTE - might not work with Samsung phones.
$184.00
LL0007
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$36.00
LL0006
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$36.00
LL0008
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$37.00
LL0001
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
$29.00
LL0022
4 x 6 style, 45 watt LED 60° flood light. Flood beam is made in the lens for a wider pattern than the 845-2. Standard bracket.
$44.00
LL0023
4 x 6 style, 45 watt LED 60° flood light. Light beam is created in the reflectors, and a clear lens is used for higher lumen output.
Standard bracket.
$44.00
LL0112
LED Hood Conversion Frame for JD 4050,4250 and 4450.
$99.90
LL0413
Headlight kit for Magnum Tractors. Includes Stainless Steel Hardware, Plug & Play. OEM Replacement. Replaces OEM Part Number: 91971C2 and 91972C2.
$219.00
LL0307
Set of right and left headlight for some CIH tractors, & Sprayers.
$259.00
LL0050
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
$69.50
