LL0034
PAR-36 size rubber housing. Simple rubber housing with a steel mounting bracket. No rubber grommet needed.
$10.90
Search
LL0004
PAR-36 size replacement LED light for the old style sealed beam halogen light. 20° Spot Beam. 1450 lumen, 30 watt rated / 18 watt use.
$27.00
LL0030
A steel housing with a single bolt for mounting in the fenders on some tractors. Rubber grommet included.
$19.00
LL0070
A Round 40-watt CREE LED light. Works as a replacement for Par-36 style lights. Fantastic light output!. 60° Flood beam. Price is for one light only, the 2 lights show the 2 style rubber grommets that are included. This model 408 is the one that looks most like the old halogen.
$54.00
LL0315
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 20° Spot Beam.
$15.00
LL0334
The Par-36 light as a combo of the red taillight and white work light. 3 spades on the rear for power connections. 12 volt. Bulb number: 4409X, 4409 Replaces:
AC: 250301, 235583
CASE: A40855
IH: 371461R92 & FITS LIGHT 377102R92
MM: 10p1729, 10p2646, 20-7000652
Oliver: 103593A, 166406A, 20-7000652
White: 10P2646
$32.00
LL0543
LED-2206 w/ built in resistor. Used on CaseIh, IH, FNH, Versatile/Buhler and more. Replaces OEM Part Numbers: 92185C1, 216044C91, 216044C92, 92260C1, 130882C91, 107324C91, V93104, V77050, 9706415, 86014019, 86023276, 86016518, 86012669, 87053368, 83977683, & 8770630. Add SKU LL0489 (Weather Pack 2 pin female pins/male shroud) if you need the connectors for the tractor side.
$33.00
HH1272964
Upgrade International Harvester tractors to accept ISO male tips (models 1971 to 1983). This kit contains all of the necessary parts for 1 remote or 2 outlets.
- Easy push/pull connect and disconnection
- Reduced pressure drop – longer system life
- Simple, fast installation
- Dust cap keeps dust and dirt out
Includes:
- (2) Cap Screws
- (2) Washers
- (2) Cartridge Body Assemblies
- (2) ##HH1272196## Dust Caps
- (2) Snap Rings
- (4) ##HH25173## Square Cut Seals
- (4) O-Ring Seals
If you require Male Coupler Tips, use ##8301372## or ##8301373##
$215.35
S118581
Deluxe style seat cushions. Will NOT replace original Grammer Seat. Replacement cushions for a Sears Seat with mechanical or hydraulic suspension. Compatible with fold-up arm rests.
If you want to restore your seat back to its original appearance, choose Hy-Capacity’s high quality, hand stitched Cushion Sets. Quality is woven into the fabric of every Cushion and Seat.
Includes: Seat Cushion, & Back Cushion
$455.95
68803 HD
Heavy duty version of ##68802 HD##.
Includes: (7) ##381490## Heavy Duty Friction Discs, (9) ##381489## Separator Plates
$72.86
8301056
Starter - New, 12V, DD, CW, Aftermarket Delco Remy
$634.50
885011 HD
Heavy Duty Compressor Clutch, York/Tecumseh ER210, ET210, w/ Coil
$171.65
8813265A
Suction fitting. For flare hose connection, use ##8813218## adapter.
$25.30
8890162
Inlet is on the left hand side with the high pressure relief valve towards you.
$42.11
C864FM
Easy to install- lays over the existing Floor Mat. Helps to reduce the noise in the cab of your equipment. Durable 1/2" thick textured rubber.
$161.69
68804 HD
Heavy duty version of ##68802 HD## & ##68803 HD##.
Includes: (18) One Sided Friction Drive Plates, (2) ##365229## Steel Sealing Rings
$166.76
HH178149P
This genuine Prestolite solenoid will bring power to your starter when you need it. Dependable solenoid switch at a great price. Intermittent duty cycle w/ 3 terminals, 5/16"-18 Battery & Motor Studs and 10-32 Excitation Stud
$42.88
888190
Expansion Valve, Right Angle, Internally Equalized
$40.51
134893
Large pads. Pressure plate side.
$229.93
8812333812
Vented. For 2 wire applications, use the wire that runs motor the fastest. To assure proper fit, compare dimensions, as many models have been updated to a small diameter motor.
$134.39
888301747
Eliminates back seat (shut off) valves.
Includes: ##8813264A## (Compressor Fitting), ##8813265A## (Compressor Fitting), ##8813217## (#8 Flare Adapter), ##8813218## (#10 Flare Adapter), ##88418## (Seals)
$92.63
444811N
Use w/ models that have a flat flywheel & 2" Transmission Input Shaft.
Used w/ ##134892##, ##134893##, Flywheel & PPA Side Discs.
$525.66
S118583
Deluxe style seat cushions. Will NOT replace original Grammer Seat. Replacement cushions for a Sears Seat with mechanical or hydraulic suspension. Compatible with fold-up arm rests.
If you want to restore your seat back to its original appearance, choose Hy-Capacity’s high quality, hand stitched Cushion Sets. Quality is woven into the fabric of every Cushion and Seat.
Includes: Seat Cushion, Back Cushion
$419.86
8301373
Poppet shut-off valve and shielded valve-guide to prevent accidental disconnections caused by sudden backflow.
$24.91
8870272229
Capillary Tube measures 48. Cold On = 33 degrees. Cold Off = 26 degrees.
$47.78
68802 HD
Includes: (5) ##381490## Friction Disc & (12) ##381489## Separator Plate
$72.86
8813264A
Discharge fitting. For flare hose connection, use ##8813217## adapter.
$30.62
134892
Large pads. Flywheel side.
$229.93
Faster Hydraulic Breakaway Coupler, Poppet Shut-Off, Male, Female; 1/2" - 14 NPTF, Genuine OEM Style
8301372
Poppet shut-off valve and shielded valve-guide to prevent accidental disconnections caused by sudden backflow.
$29.86
881150
Will NOT work on metric thread compressors w/ 1/2 long pressure relief valve.
$16.01
8301779
This tool is for installation purposes & not returnable.
$34.02
HH107655P
This genuine Prestolite solenoid will bring power to your cab when you need it. Dependable solenoid switch at a great price. Continuous duty cycle w/ 3 terminals.
$49.90
8813217
Converts #8 (3/4) Male Insert O-Ring to #8 (3/4) Male Flare.
$12.56
8813218
Converts #10 (7/8) Male Insert O-Ring to #10 (7/8) Male Flare.
$14.06
88111266C1
High Pressure Switch, Normally Open, 250-375 PSI
$95.26
88111267C3
Low Pressure Switch, Normally Closed, 6-34 PSI
$49.27
LED-408U
The LED-408U is a complete LED light that can replace OEM PAR-36 style lights. It includes hardware for all 3 locations on a JD SG cab, in front fenders, top of rear fender, and top rear cab. 3200 lumen vs. the OEM lights at 600 lumens. This light uses 3D reflector cups for the best light output.
$69.00
LL0026
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$37.00
LL0028
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$38.00
HC92185C1
Uses original mount & wiring.
Includes:
• Stainless steel hardware
$55.90
Recently viewed products
