LL0034
PAR-36 size rubber housing. Simple rubber housing with a steel mounting bracket. No rubber grommet needed.
$10.90
Search
LL0004
PAR-36 size replacement LED light for the old style sealed beam halogen light. 20° Spot Beam. 1450 lumen, 30 watt rated / 18 watt use.
$27.00
LL0030
A steel housing with a single bolt for mounting in the fenders on some tractors. Rubber grommet included.
$19.00
LL0070
A Round 40-watt CREE LED light. Works as a replacement for Par-36 style lights. Fantastic light output!. 60° Flood beam. Price is for one light only, the 2 lights show the 2 style rubber grommets that are included. This model 408 is the one that looks most like the old halogen.
$54.00
LL0315
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 20° Spot Beam.
$15.00
LL0334
The Par-36 light as a combo of the red taillight and white work light. 3 spades on the rear for power connections. 12 volt. Bulb number: 4409X, 4409 Replaces:
AC: 250301, 235583
CASE: A40855
IH: 371461R92 & FITS LIGHT 377102R92
MM: 10p1729, 10p2646, 20-7000652
Oliver: 103593A, 166406A, 20-7000652
White: 10P2646
$32.00
735260
This core is extremely rare and your core is required to fulfill this order. Contact us for instructions on sending your core in for Rebuild & Return. Mounting holes measure 12-3/4", center to center. Overall length is 18-1/2". Old style cooler w/ direct mount fittings. Mounting gaskets & O-Rings are sold separately order 8301774.
$543.19
HH1272964
Upgrade International Harvester tractors to accept ISO male tips (models 1971 to 1983). This kit contains all of the necessary parts for 1 remote or 2 outlets.
- Easy push/pull connect and disconnection
- Reduced pressure drop – longer system life
- Simple, fast installation
- Dust cap keeps dust and dirt out
Includes:
- (2) Cap Screws
- (2) Washers
- (2) Cartridge Body Assemblies
- (2) ##HH1272196## Dust Caps
- (2) Snap Rings
- (4) ##HH25173## Square Cut Seals
- (4) O-Ring Seals
If you require Male Coupler Tips, use ##8301372## or ##8301373##
$215.35
68803 HD
Heavy duty version of ##68802 HD##.
Includes: (7) ##381490## Heavy Duty Friction Discs, (9) ##381489## Separator Plates
$72.86
885010 HD
Heavy Duty Compressor Clutch, York/Tecumseh ER210, ET210, w/ Coil
$157.85
1902929M91N
Three wire system w/ R-terminal.
$157.63
880253
LH Suction w/ clutch facing you. When replacing this Flange Type compressor with a Rotolock Type also order 888301747 York & Tecumseh Shut Off Valve Replacement Kit.
$437.17
HCNOKDT436
Contains narrow gap rings. Will work on both side mount & valve cover breathers.
Includes:
- (6) ##HC684261## Cylinder Kits
- (6) ##HC1823855PR## Rod Bearings
- (1) ##HC1823847## Main Bearing Set
- (1) ##HC1817254## Head Gasket Set
- (1) ##HC674399## Lower Gasket Set
- (6) ##HC675006## Piston Pin Bushings
- (1) ##HC680117## Cam Bushings
$1,524.17
67735N
14" Single Stage Pressure Plate, w/ 1-7/8" 18 Spline Hub - New
$284.98
8301167
Includes a grease zerk as a lubrication point on the Reverse Shift Lever. Bushing not included.
Contents: ##HH404855## Shift Linkage Sleeve, ##HH529490## Reverse Shift Lever, ##HH529489## Range Shift Lever & ##HH397987## Collar
$229.93
880137A
LH Suction w/ clutch facing you. When replacing this Flange Type compressor with a Rotolock Type also order 888301747 York & Tecumseh Shut Off Valve Replacement Kit.
$318.96
C66FM
Easy to install lays over the existing Floor Mat. Helps to reduce the noise in the cab of your equipment. Durable 1/2" thick textured rubber.
$142.49
HH223313
2WD machines.
Includes: ##HH384006## Short Tie Rod, ##HH359984## Long Tie Rod, ##HH383917## Tube, Clamps & Jam Nut
$89.04
8813265A
Suction fitting. For flare hose connection, use ##8813218## adapter.
$25.30
HH533808
2WD machines. Measures 3-3/4" center to center hole spacing.
$37.24
67736 HD8
Large pads. Optional Heavy Duty for ##67736 HD6##.
$418.45
HCTR89879
Mounting Gasket located between the Turbo & Manifold.
$8.99
HH102263
Internally rotatable.
$676.66
HCRP1809964C92
Teflon style seal. Do not separate the Wear Sleeve prior to installation.
$32.81
888301262
IMPORTANT NOTE: A belt change may be necessary. Replaces York/Tecumseh compressors that mount on the side or base.
Includes: ##8804318## Compressor & ##8813274## Tube-O to Rotolock Adapter
$660.76
HC1823848
1.225" Bearing Width On Positions 1 Thru 6
Includes: Thrust Bearings & Washers
$124.44
68804 HD
Heavy duty version of ##68802 HD## & ##68803 HD##.
Includes: (18) One Sided Friction Drive Plates, (2) ##365229## Steel Sealing Rings
$166.76
672644N
Hy-Capacity’s upgraded version of this water pump features a heavy-duty roller/ball bearing design and a larger 1" shaft for added strength and durability compared to typical 3/4" shaft designs. Assembled in Humboldt, Iowa, USA.
$150.67
HH71785LH KIT
2WD machines. Case hardened Spindle. Knee forging heavier than OEM.
Includes: ##HH71785## Spindle, ##HH223313## Tie Rod Assembly, ##HH531248## Steering Arm
$299.56
HC531260R92
2WD machines.
Includes: (2) ##HC358958R2## Bushing
$491.39
8890119A
Receiver Drier, w/ High Pressure Relief Valve
$37.24
675626
This core is extremely rare and your core is required to fulfill this order. Contact us for instructions on sending your core in for Rebuild & Return.
Includes: Reman Camshaft, Reman Gear & New Lifters
$415.01
88830741
Includes: • ##8815000## (Compressor) • ##88144## (Manifold) • (2)##8813274## (Rotolock Adapters) • Female Connector, Mounting Bracket & Hardware Looking for a replacement Compressor? Order ##8815000##.
$479.26
70935 NEW
Hy-Capacity designed Cessna style pump w/ open back (plate provided) to accept piggyback pump.
Includes: ##18536##
$537.56
70935N KIT
Hy-Capacity designed Cessna style pump w/ open back (plate provided) to accept piggyback pump.
Includes: ##70935 NEW## Hitch Pump, ##HH543976## Pilot Relief Valve, ##382244## Pump Mounting Gasket, and Mounting O-Rings
$694.18
69065
This core is extremely rare and your core is required to fulfill this order. Contact us for instructions on sending your core in for Rebuild & Return.
$354.59
8812333812
Vented. For 2 wire applications, use the wire that runs motor the fastest. To assure proper fit, compare dimensions, as many models have been updated to a small diameter motor.
$134.39
ECA1000
Ignition activated, w/ 10A power transistior & w/o brush holder. Fits 10SI, 12SI, 15SI & 27SI Delco Alternators.
$10.96
HC71802666
1.00" rotor size. To reduce rotor scoring, OE changed to a new style housing w/ a larger bore for the outer rotor. The bore was enlarged by .014” and maximum housing to rotor clearance to .024”. It allows for the use of flat-sided or round o-rings.
The black o ring is used in the oil pump housing and the red is used on the block side
This oil pump is featured in our blog post, "Rebuild your Engine during your Winter Downtime." Read it here.
$187.99
830471
Hy-Capacity design w/ a lip type oil seal. Stops oil leaks from the MCV selector spool shaft.
Includes: Nut, Lip Seal & O-Ring
$43.73
S830872
This compact Mechanical Suspension features a heavy-duty shock absorber that is ideal for small utility/row crop tractors. Features an easy to operate ride control, weight adjustment, 3.13" suspension travel & 9" maximum height adjustment. Assembly must be used w/ Hy-Capacity's Cushion Set Numbers ##S400700##, ##S400700BU##, ##S400720##, or the original seat. Includes: • (1) ##S830952## Mechanical Suspension • (1) Slide Track Set • (1) Pedestal • (2) Base Plates • Installation Instructions
$781.31
885029
Compressor Clutch, Seltec/Tama TM08 - TM16 Series, w/ Coil
$184.60
830424
Buy 1 tool & use for multiple applications! This tool is for installation purposes & not returnable.
$97.15
