Products tagged with 'JD'

LED-3301A, Low beam for JD 9xxx R series

JD 7x20 / 7x30 series LED light kit. 4 grill lights, 2 front cab, and 4 rear lights included. Add cab side lights if needed. Note - If you are replacing HID / Xenon lights (deluxe headlight option) with the LED-9306 grill corner lights, you will need a different connector for the OEM wires, or you can add it to the kit. JD 7630, 7720, 7730, 7820, 7830, 7920, 7930.

JD 6xxx R series LED light upgrade. 8 x 4300 lumen Thomas LED work lights for the cab included in this kit. This kit is for tractors without sunroof, if your model has a sunroof, you need 2 x HP-1 + adapter wires instead of 2 or 4 of the HP-4.

High power 40 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 4 x 10 watt LED chips. This light will only fit in normal full size housings with rubber grommets due to large cooling fins. Also it will NOT fit in the new plastic housings used on some later model JD's. This light has a temperature sensor that will limit the power of the light if the temperature gets too high. Max effective lumen 2800 - minimum effective lumen 2200.

30 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. Available beam types are 60° flood, 40° beam, Hi-Lo beam, and Spot beam.

PAR-36 size replacement LED light for the old style sealed beam halogen light. 5-watt CREE LED chips. Actual power use is around 18 watts, effective lumen around 1400, raw lumen around 2200.

LED-2417 amber with a built-in resistor. No need for special LED flasher relays! This model fits some CIH models - replaces OEM # 84269970, 84273385, 84273384

Kit for newer JD 6xxx M series with 6 round cab lights, 2 rear cab side lights, 2 fender lights. Add front mid cab lights and headlights if needed.

LED-4024-40W - light for combine grain tank / rear / under shields and much more.

Thomas LED for JD combines with oval headlights lights, this kit can convert most of the OEM halogen lights to LED. The basic kit consists of 4 LED cab lights (HP-5 - 5000 lm) and 2 lower cab lights + 1 unload auger light (LED-765 - 4800 lm). For combines without HID lights, you can add 2 extra lights for the top cab, replacing all 6 top cab lights. Select extra lights as needed. Kit total effective lumen ranges from 34400 to 56000 depending on selection.