Borable bushings have a smaller inside diameter (I.D.) to allow a machine shop to bore the bushing on center to properly restore the center-to-center distance of the large and small ends of the connecting rod.
Borable bushings have a smaller inside diameter (I.D.) to allow a machine shop to bore the bushing on center to properly restore the center-to-center distance of the large and small ends of the connecting rod.
Borable bushings have a smaller inside diameter (I.D.) to allow a machine shop to bore the bushing on center to properly restore the center-to-center distance of the large and small ends of the connecting rod.
Borable bushings have a smaller inside diameter (I.D.) to allow a machine shop to bore the bushing on center to properly restore the center-to-center distance of the large and small ends of the connecting rod.
Borable bushings have a smaller inside diameter (I.D.) to allow a machine shop to bore the bushing on center to properly restore the center-to-center distance of the large and small ends of the connecting rod.
Borable bushings have a smaller inside diameter (I.D.) to allow a machine shop to bore the bushing on center to properly restore the center-to-center distance of the large and small ends of the connecting rod.
Borable bushings have a smaller inside diameter (I.D.) to allow a machine shop to bore the bushing on center to properly restore the center-to-center distance of the large and small ends of the connecting rod.
Borable bushings have a smaller inside diameter (I.D.) to allow a machine shop to bore the bushing on center to properly restore the center-to-center distance of the large and small ends of the connecting rod.
Borable bushings have a smaller inside diameter (I.D.) to allow a machine shop to bore the bushing on center to properly restore the center-to-center distance of the large and small ends of the connecting rod.
Honable bushings have a larger inner diameter (I.D.). They do not correct center-to-center differences in marginal connecting rods and must be finished honed to allow for correct pin clearance.
Honable bushings have a larger inner diameter (I.D.). They do not correct center-to-center differences in marginal connecting rods and must be finished honed to allow for correct pin clearance.
Honable bushings have a larger inner diameter (I.D.). They do not correct center-to-center differences in marginal connecting rods and must be finished honed to allow for correct pin clearance.
Honable bushings have a larger inner diameter (I.D.). They do not correct center-to-center differences in marginal connecting rods and must be finished honed to allow for correct pin clearance.
Honable bushings have a larger inner diameter (I.D.). They do not correct center-to-center differences in marginal connecting rods and must be finished honed to allow for correct pin clearance.
Honable bushings have a larger inner diameter (I.D.). They do not correct center-to-center differences in marginal connecting rods and must be finished honed to allow for correct pin clearance.
Honable bushings have a larger inner diameter (I.D.). They do not correct center-to-center differences in marginal connecting rods and must be finished honed to allow for correct pin clearance.
Honable bushings have a larger inner diameter (I.D.). They do not correct center-to-center differences in marginal connecting rods and must be finished honed to allow for correct pin clearance.
Honable bushings have a larger inner diameter (I.D.). They do not correct center-to-center differences in marginal connecting rods and must be finished honed to allow for correct pin clearance.
Honable bushings have a larger inner diameter (I.D.). They do not correct center-to-center differences in marginal connecting rods and must be finished honed to allow for correct pin clearance.
Honable bushings have a larger inner diameter (I.D.). They do not correct center-to-center differences in marginal connecting rods and must be finished honed to allow for correct pin clearance.
Honable bushings have a larger inner diameter (I.D.). They do not correct center-to-center differences in marginal connecting rods and must be finished honed to allow for correct pin clearance.
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
Cable for connecting the Thomas HP and the LED-765 Oval / 760 Rectangular to tractors and combines that previously used a weather pack 2 pin connector.
Cable for connecting the Thomas HP and the LED-760/765 lights to tractors and combines that previously used a 9005 bulb. Newer JD (20, 30, and R series and S series combines + other brands where the light replaced used a 9005 bulb.
LED-765 is a 4x6 style Oval LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5000-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-665.
30 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. Available beam types are 60° flood, 40° beam, Hi-Lo beam, and Spot beam. This light has a chrome background, the picture does not show it well.
24 Watt Oval LED work light. Now includes H11 connector (same as 880 series bulb connector) so the light will plug and play on most tractors and combines using the same size light.
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
HD Wi-Fi Camera for Ipad / Android. For use with 12 volt DC power supply or 12 volt battery. Very easy to use. App name "JoyTrip". NOTE - might not work with Samsung phones.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
LED 2x5 LED light for the top front cab on the 7000-8000 series tractor, and front hood light on older JD’s, 55 and 60 series. 50° beam pattern. 1700 effective lumen.
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.
