Cables

The TEXA Cobus D89 Cable (T73) is used to perform diagnosis on Cobus airport buses.

7-pin cable for diagnosing LINDE vehicles.

TEXA JLG Diagnostic Cable (3151/T77)

8-pin terminal cable, used for the diagnosis of the auxiliary heating system mainly on SOLARIS and TEMSA BUSES.

For AGCO / Fendt agricultural equipment. Works with the TEXA Navigator. This is a diagnostic cable used to connect the TEXA Navigator adapter to AGCO / Fendt tractors. Fendt is a leading brand of tractors for the AGCO American agricultural machinery manufacturer.

For Bobcat machines. Works with the TEXA Navigator. This is a 7 pin diagnostic cable used to connect the TEXA Navigator adapter to Bobcat equipment for machine-side diagnostics. Enhancements have been done to the E-Series Excavator and the S-Series Skid Steer loaders. The TEXA off highway diagnostic system has always had coverage for both the Kubota and Bobcat engines, you can now perform “Vehicle Total Diagnosis”. This command will examine the entire Bobcat system and give you a quick look at inactive and active fault codes, along with looking at over 4,400 parameters.

For Carraro lifter for Massey Ferguson, John Deere, and Claas. Works with the TEXA Navigator. This is a 3 pin diagnostic cable used to connect the TEXA Navigator adapter to Carraro rear linkage on Agricube, Claas Nectis and Nexos series, Jopn Deere series 5015 and 5000G, Massey Ferguson series MF3600 and Valtra series A tractors. Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter.

For CAT construction equipment. Works with the TEXA Navigator. This is a 14 pin diagnostic cable used to connect the TEXA Navigator adapter to 2015 and newer Caterpillar construction equipment with a round 14 pin connection.

For CAT and Perkins off-highway equipment. Works with the TEXA Navigator. This is a 9 pin diagnostic cable used to connect the TEXA Navigator adapter to CAT and Perkins off-highway equipment. Caterpillar and Perkins equipment uses a slightly different 9 pin connector which requires this cable.

For Deutz engines. Works with the TEXA Navigator. This is a 12 pin diagnostic cable used to connect the TEXA Navigator adapter to vehicles with Deutz engines.

For Doosan equipment. Works with the TEXA Navigator. This is a diagnostic cable used to connect the TEXA Navigator adapter to Doosan heavy equipment.

For Doosan equipment. Works with the TEXA Navigator. This is a 6 pin diagnostic cable used to connect the TEXA Navigator adapter to Doosan engines in Tier 4 Bobcat equipment. Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter.

For Hitachi 3 Series equipment. Works with the TEXA Navigator. This is a 6 pin diagnostic cable used to connect the TEXA Navigator adapter to Hitachi 3 Series equipment.

For Hyundai construction equipment. Works with the TEXA Navigator. This is a 9 pin diagnostic cable used to connect the TEXA Navigator adapter to Hyundai excavators and loaders.

For Komatsu construction equipment. Works with the TEXA Navigator. This is a 12 pin diagnostic cable used to connect the TEXA Navigator adapter to Komatsu backhoe loaders, loaders, excavators, dozers, and motor graders.

For Kubota engines. Works with the TEXA Navigator. This is a 4 pin diagnostic cable used to connect the TEXA Navigator adapter to Kubota engines in agricultural and construction equipment.

For Landini and McCormick agricultural equipment. Works with the TEXA Navigator. This is a 4 pin diagnostic cable used to connect the TEXA Navigator adapter to Landini and McCormick tractors.

For Massey Ferguson agricultural equipment. Works with the TEXA Navigator. This is a 16 pin diagnostic cable used to connect the TEXA Navigator adapter to Massey Ferguson tractors series 5400, 6400, 7400, and 8400.

For MTU engines with MDEC 2. Works with the TEXA Navigator. This is a 16 pin diagnostic cable used to connect the TEXA Navigator adapter to MTU engines with MTU Diesel Engine Control (MDEC). MTU Friedrichshafen GmbH is a manufacturer of commercial internal combustion engines founded by Wilhelm Maybach and his son Karl Maybach in 1909. MDEC (MTU Diesel Engine Control) made it's debut in the 1990's, which controlled diesel engines with either unit-pump fuel injection or the common rail system, which was still quite new at the time.

For New Holland equipment with diagnosis button. Works with the TEXA Navigator. This is a diagnostic cable used to connect the TEXA Navigator adapter to New Holland vehicles series TM I and II. Certain New Holland equipment does not require computer to connect to vehicle to retrieve codes. This New Holland diagnosis button cable for the TM 2nd Series tractors is what this cable is for. At the rear PTO there will be a connector port, and this cable will connect to it. Simply press the button, and the blink codes will then flash on the driver display panel.

For New Holland TN series tractors. Works with the TEXA Navigator. This is a 5 pin diagnostic cable used to connect the TEXA Navigator adapter to New Holland TN, TNA, and TL series tractors. New Holland is owned by CNH Industrial.

For Class and Renault equipment. Works with the TEXA Navigator. This is a 4 pin diagnostic cable used to connect the TEXA Navigator adapter to Claas and Renault equipment. Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter.

For SDF group and Claas agricultural equipment. Works with the TEXA Navigator. This is a 14 pin diagnostic cable used to connect the TEXA Navigator adapter to Same-Deutz-Fahr vehicles and Claas combine harvesters and shredders. SAME-Deutz-Fahr is also known as SDF group. Their products are produced under the names of SAME, Deutz-Fahr, Lamborghini Tractor, Huerlimann Tractors, Gregoire, and Lamborghini GreenPro.

For Scania engines. Works with the TEXA Navigator. This is a 4 pin diagnostic cable used to connect the TEXA Navigator adapter to Scania tier 4 engines in Doosan equipment. This will be the connector you need to diagnose your loaders, dumpers and excavators. Coverage now includes: DA-Series Dumpers – This equipment uses Scania Tier 3, 4, and 4F engines. Coverage includes live data, read/clear fault codes, and 30+ bi-directional commands such as DPF regen, VGT calibrations, cylinder cut-out test, SCR commands, and many more. DX-Series Excavators – Besides the Scania engines as mentioned above, this series of Doosan equipment could also have a Cummins engine it, which is covered by TEXA as well. There are over 70 commands and activation’s available for Cummins engines to give you complete diagnostic coverage. DL-Series Loaders – The Doosan DL-Series loaders use Scania engines, which is the same as the DA-Series dumper and covered very well. The DL-Series is also covered on the transmission end, as they use the ZF Ergo Power EST37 transmission. This system will read all fault codes and live data, and perform 16 commands and activation’s on this transmission model. Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter.

For Valtra agricultural equipment. Works with the TEXA Navigator. This is an 8 pin diagnostic cable used to connect the TEXA Navigator adapter to Valtra tractors.

For Yanmar engines. Works with the TEXA Navigator. This is a diagnostic cable used to connect the TEXA Navigator adapter to Yanmar engines in construction equipment.

For SISU, Danfoss, and Carraro equipment. Works with the TEXA Navigator. This is a 9 pin diagnostic cable used to connect the TEXA Navigator adapter to SISU engines, Danfoss and Carraro transmissions.

TEXA Retrofit Kit For Old Bobcat Machine (3907644) Cable

For Cummins engines in Truck and OHW applications. Works with the TEXA Navigator. This is an 8 pin diagnostic cable used to connect the TEXA Navigator adapter to Cummins ECMs for truck and off-highway vehicles with a 3 pin connector.

Allows custom pin out. Works with the TEXA Navigator. For the TEXA Off-Highway (OHW) module, sometimes those really rare and unique pieces of equipment don't have a standard cable. This is where the 3151/T07 cable kit comes into play. The TEXA software will tell you exactly how to use this cable kit if it is called upon so you can make a custom pin out connection to your equipment.

For Volvo construction equipment. Works with the TEXA Navigator. This is a 14 pin diagnostic cable used to connect the TEXA Navigator adapter to Volvo construction equipment with a round 14 pin connector. Note: This cable requires the TEXA Power Supply and Adapter Kit for use with the Navigator TXT adapter.

The TEXA ZF USB Cable (T72) connects via the USB Mini B port to diagnose ZF EcoLife Transmissions.