You have no items in your shopping cart.

Larsen LED kit for JD 4020, 5 Par-36 lights.

Larsen LED kit for JD 4020. Includes 2 x Par-36 Hi-Lo lights, 3 x Par-36 Flood lights. 1400 lumen each light. Select a standard white light or red/white for the rear light.
SKU: JD 4020
*
*
$0.00
+ -
Notes:

All prices are USD. If imported into Canada/Internationally there will be brokerage costs collected by the carrier. Check the"Canada/World" link at the top of the page for more info.  Please note that Hy-Capacity items can not be shipped to Canada / International.

Larsen LED kit for JD 4020. 12 volt negative ground systems only.

 

Larsen LED kit for JD 4020. Includes 2 x Par-36 Hi-Lo lights, 2 x Par-36 Flood lights, & 1 x Par-36 flood for rear light. 1400 lumen each light.

If your tractor does not use Hi-Lo beam lights in the front fender, just wire the 2 hi-lo beam lights on high beam. 

The LED Par-36 uses male spade terminals to connect to the wires (included). 12-24 volt. 3-year warranty.

The standard Par-36 halogen is around 400-600 lumen, the standard LED is 1400 lumen each.

If you are replacing the round fender flashers on an open station tractor, you will need to order the LED flasher relay.

Lights used in this kit can be found in Related Products.

 

Larsen LED kit for JD 4020. 12 volt negative ground systems only.

 

Larsen LED kit for JD 4020. Includes 2 x Par-36 Hi-Lo lights, 2 x Par-36 Flood lights, & 1 x Par-36 flood for rear light. 1400 lumen each light.

If your tractor does not use Hi-Lo beam lights in the front fender, just wire the 2 hi-lo beam lights on high beam. 

The LED Par-36 uses male spade terminals to connect to the wires (included). 12-24 volt. 3-year warranty.

The standard Par-36 halogen is around 400-600 lumen, the standard LED is 1400 lumen each.

If you are replacing the round fender flashers on an open station tractor, you will need to order the LED flasher relay.

Lights used in this kit can be found in Related Products.

 

Use On Below Models (Click to expand)
Write your own review
*
*
  • Bad
  • Excellent
Customers who bought this item also bought
LL0030
A steel housing with a single bolt for mounting in the fenders on some tractors. Rubber grommet included.
$16.00
LL0328
LED-486, Round stud mounted warning light for mounting onto fenders, and many other places where you need an amber warning light. 8.5 watt. Note - This light does not have a built-in flasher, they would require a flasher relay in order to flash, or installed in place of an existing flasher. Also - most older flasher relays will not work with this low-wattage turn signal, you will need flasher relay SKU LL0466 for the turn signal to work.
$36.00
LL0032
Rubber grommet for the PAR-36 size lights. 3 tabs lock onto the OEM Hobbs housing. Not for the front fender lights. Replaces JD part# R42689.
$6.50