This light is made so it can be used on the JD "R" series tractors, even the cab mounted lights can be replaced using the special "R" series bracket. Use the standard bracket for mounting onto fender and all other locations.
Very powerful light at 4300 effective lumen! 60° flood beam, 40° Trapezoid, or 20° spot beam.
The quality and output of the Thomas brand are among the best in the industry!
This light uses an integrated DT connector - a cable is included that will connect to the light and ends in bare wires for you to add a connector of your choice.
DT to 9005 and other cables can be ordered on the bottom of the page, and all adapter cables can be ordered here adapter cables
For install where the light is hanging from the cab, you might need the "JD bracket" This bracket can be used on the HP-4, HP-4 oval, HP-5 & HP-6.
Specs :
THOMAS HP4 oval
LED : 4 pcs CREE High Power LEDs
Effective Lumen : 4366 / 5700 Kelvin
Power used : 46.4 Watt / 3,4 A @ 13,5 Volt
Voltage : 10 - 60 Volt
Temperature : -40°F to +140°F
Beam : 20°, 40° and 60°
Plug : integrated DEUTSCH 2 pin
IP : waterproof IP68
RFI and EMC filter
Warranty : 3 years
HP-4 Size : 6 7/8 wide x 3 3/8 tall (4" tall mounted) x 3 1/8 deep
LED-760 is a 4x6 style LED work light. 6 x Osram P9 LED's at 10 watt each, 4800 effective lumens, 5200-5500k, and only 3.8 amp/46 watt use. Select the light beam type, then select the bracket you need for your application. Includes a 5" adapter cable that fits 9005 or H11 connectors. You can find more adapter cables at the bottom or right side of this page. This is an updated model of our LED-660.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 40° beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 60° Flood Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700 Hi-Lo Beam, 800 low beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
Cab lights for the 9000 series JD combine using a rectangular light on the cab - fits any vehicle using the JD9000 series cab. Use the combo beam for most distance, we suggest 2 combo beam and 4 flood beam for the combines.