You have no items in your shopping cart.

66 / 86 / 806 Series

LED light conversion for IH 666, 686, & 806.  

LED Light kit for IH 1486 & 1586. Includes 6 Par-36 LED bulbs to replace the OEM halogen bulbs. Add 2 extra Par-36 flood or 2 complete LED-408 for the rear fenders if needed. Now using High Output PAR-36 LED lights.

The Par-36 lights are the 4.5“ round lights that install into the existing housings, all you have to do is remove the old light, and install female spade connectors on the wires,(Included) then re-install the light.

Please note that the Hi-Lo light is a 3 wire light if you only have 2 wires to the OEM light, (positive and negative) then the LED light will have to be wired on high beam, and the dimming effect will be limited. 

This kit will improve your lighting by 200-300%, and lower the electrical amp draw by 1/2 !

The standard Par-36 halogen is around 600-800 lumen, the standard LED is 1400 lumen each light, the High Output model is 1700 lumen effective each.

Filters
per page
IH6x6-3
LED light conversion for IH 666 & 686. 3 Par-36 flood lights, 2 x Par-36 Hi-Lo LED lights are included in this kit. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$137.00
IH6x6-4
LED light conversion for IH 666 & 686. 4 Par-36 flood lights, 2 x Par-36 Hi-Lo LED lights are included in this kit. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$164.00
IH86kit
LED Light kit for IH 986/1086/1486/1586 . Includes 6 Par-36 LED bulbs to replace the OEM halogen bulbs. Add 2 extra Par-36 flood or 2 complete LED-408 for the rear fenders if needed. Now using High Output PAR-36 LED lights. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$196.00
IH806
LED light conversion for IH & Farmall 806. 2 x Par-36 flood lights, 2 x Par-36 trapezoid and 1 combo Red/White Par-36 lights are included in this kit.
$143.00
LL0334
The Par-36 light as a combo of the red taillight and white work light. 3 spades on the rear for power connections. 12 volt. Bulb number: 4409X, 4409 Replaces: AC: 250301, 235583 CASE: A40855 IH: 371461R92 & FITS LIGHT 377102R92 MM: 10p1729, 10p2646, 20-7000652 Oliver: 103593A, 166406A, 20-7000652 White: 10P2646
$35.00
HO Par-36
30 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. Available beam types are 60° flood, 40° beam, Hi-Lo beam, and Spot beam.
$32.00
LL0315
High power PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. 20° Spot Beam. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$20.00
40w Par-36
High power 40 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 4 x 10 watt LED chips. This light will only fit in normal full size "HOBBS" housings with rubber grommets due to large cooling fins. It will not fit the "GUIDE" brand housings with the "rolled lip". Also it will NOT fit in the new plastic housings used on some later model JD's. This light has a temperature sensor that will limit the power of the light if the temperature gets too high. Max effective lumen 2800 - minimum effective lumen 2200.
$39.00
LED-408U
The LED-408U is a complete LED light that can replace OEM PAR-36 style lights. It includes hardware for all 3 locations on a JD SG cab, in front fenders, top of rear fender, and top rear cab. 3200 lumen vs. the OEM lights at 600 lumens. This light uses 3D reflector cups for the best light output.
$58.00
LL0030
A steel housing with a single bolt for mounting in the fenders on some tractors. Rubber grommet included.
$16.00
LL0032
Rubber grommet for the PAR-36 size lights. 3 tabs lock onto the OEM Hobbs housing. Not for the front fender lights. Replaces JD part# R42689.
$6.50
LL0034
PAR-36 size rubber housing. Simple rubber housing with a steel mounting bracket.
$8.00
LL0025
PAR-36 size replacement LED light, this model has a lens that looks like the halogen lights, makes it appear as OEM. 60° Flood Beam. 1400 lumen, 30 watt rated / 18 watt use. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$27.00
Par-36
PAR-36 size replacement LED light for the old style sealed beam halogen light. 5-watt CREE LED chips. Actual power use is around 18 watts, effective lumen around 1400, raw lumen around 2200.
$27.00
LL0004
PAR-36 size replacement LED light for the old style sealed beam halogen light. 20° Spot Beam. 1450 lumen, 30watt rated / 18 watt use. Note: It is a good practice to drill a few holes on top and bottom of the housing the light is mounted in, this will help the lights cool.
$10.00