50 Series

Larsen LED PAR-36 kit for JD 4x50 series tractors. 6 or 8 x PAR-36 lights included, and the front nose cone can be added. Total up to 29600 lumens (max) if the brightest lights are used. Note: The 40 watt PAR-36 will only fit if your tractor has housings with a rubber grommet holding the light, - it will not work with the all in one plastic housings.

Larsen LED GOLD kit for JD 4x50. This kit is a complete light replacement kit - 8 x LED-408U lights included and an LED-3000 kit for the front nose cone. The LED-408U is a 3200 lumen light. Badly rusted housings on the tractor? No problem - this kit replaces it all. Note: The lights do not include connectors, you will have to use your own or splice the wires.

2 Hi-Lo and 2 40° lights for the front grill lights, 2 flood and 2 40° for the top roof lights & 4 flood for the rear fender lights. 12 lights total. This is the gold kit - all lights are the 3200 lumen LED-408. Note: This is a complete light replacement kit, the lights looks like the OEM lights, but are complete LED lights.

12 x 40 watt Par-36 LED bulbs included in this kit, changes all lights to LED using the existing housings. 2800 lumen/bulb (max). Note: The 40 watt PAR-36 will only fit if your tractor has housings with a rubber grommet holding the light, - it will not work with the all in one plastic housings.

8 x 30 watt, 1700 lumen Par-36 LED bulbs included in this kit and 4 LED-845 (2800 lumen 4x6) for the rear fender. This will change all front grill lights to Par-36 LED bulbs and the 2 roof lights also to Par-36 LED, and the LED-845 is replacing the 4 rear fender lights.

30 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. Available beam types are 60° flood, 40° beam, Hi-Lo beam, and Spot beam.

High power 40 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 4 x 10 watt LED chips. This light will only fit in normal full size "HOBBS" housings with rubber grommets due to large cooling fins. It will not fit the "GUIDE" brand housings with the "rolled lip". Also it will NOT fit in the new plastic housings used on some later model JD's. This light has a temperature sensor that will limit the power of the light if the temperature gets too high. Max effective lumen 2800 - minimum effective lumen 2200.

PAR-36 size replacement LED light for the old style sealed beam halogen light. 5-watt CREE LED chips. Actual power use is around 18 watts, effective lumen around 1400, raw lumen around 2200.

The LED-408U is a complete LED light that can replace OEM PAR-36 style lights. It includes hardware for all 3 locations on a JD SG cab, in front fenders, top of rear fender, and top rear cab. 3200 lumen vs. the OEM lights at 600 lumens. This light uses 3D reflector cups for the best light output.

LED Hood Conversion Kit for JD 4050,4250 and 4450. The kit comes with a wire harness (plug and play), housing, billet, bezel, and all mounting hardware. Add your choice of light model.

LED Hood Conversion Kit, LED-4000. The kit comes with a wire harness (plug and play), housing, billet, bezel, and all mounting hardware. Add your choice of light model. For JD 4650 & JD 4850

Par-36 "Guide" Glare Guard. OEM Part# R54047, R71234

A steel housing with a single bolt for mounting in the fenders on some tractors. Rubber grommet included.

Rubber grommet for the PAR-36 size lights. 3 tabs lock onto the OEM Hobbs housing. Not for the front fender lights. Replaces JD part# R42689.

PAR-36 size rubber housing. Simple rubber housing with a steel mounting bracket.

Bezel for the LED 2x5 lights

LED-91, amber with a built-in resistor. No need for special LED flasher relays! This model fits Sound guard cabs and older Steigers.

LED Tail Light for John Deere Tractors. 3 wire light, including tail and stop light function. The eyelet is the ground, the brown wire is the tail light, and the yellow wire is for the stop light (if equipped). OEM Replacement: John Deere: AR78825, RE39223.