40 Series

Larsen LED PAR-36 kit for JD 4x40 series tractors. 6 or 8 x PAR-36 lights included, and the front nose cone can be added. Total up to 22400 lumens (max) if the brightest lights are used. Note: The 40 watt PAR-36 will only fit if your tractor has housings with a rubber grommet holding the light, - it will not work with the all in one plastic housing. Instead, use the standard PAR-36 or the 30 watt model.

Larsen LED GOLD kit for 40 series JD with 6 complete lights. This kit is a complete light replacement kit - 6 x LED-408U lights included. 3200 lumen each light. Badly rusted housings on tractor? No problem - this kit replaces it all. Add 2 extra lights for the rear as needed. Note: The lights do not include connectors, you will have to use your own or splice the wires. On the 4240, 4440, & 4640 you have the option to add a nosecone light kit, but do note that it requires some cutting / remaking of the nosecone.

8 x LED-408 included in this packet, changes all lights to complete LED lights. From 600 lumen/bulb to 3200 lumen / light.

8 x 40 watt Par-36 LED bulbs included in this packet, changes all lights to LED using the existing housings. From halogen 600 lumen/bulb to LED 2800 lumen/bulb. Note: The 40 watt PAR-36 will only fit if your tractor has housings with a rubber grommet holding the light, - it will not work with the all in one plastic housing, or the slim style housings due to large cooling fins. Instead, use the standard PAR-36 or the 30 watt model.

8 High Output Par-36 LED bulbs included in this packet, changes all lights to LED using the existing housings. From 600 lumen/bulb to 1700 lumen/bulb.

30 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 6 x 5 watt CREE LED chips. Actual power use is around 22 watt, effective lumen around 1700. Available beam types are 60° flood, 40° beam, Hi-Lo beam, and Spot beam.

High power 40 watt PAR-36 size replacement LED light for the old style sealed beam halogen light. 4 x 10 watt LED chips. This light will only fit in normal full size "HOBBS" housings with rubber grommets due to large cooling fins. It will not fit the "GUIDE" brand housings with the "rolled lip". Also it will NOT fit in the new plastic housings used on some later model JD's. This light has a temperature sensor that will limit the power of the light if the temperature gets too high. Max effective lumen 2800 - minimum effective lumen 2200.

The LED-408U is a complete LED light that can replace OEM PAR-36 style lights. It includes hardware for all 3 locations on a JD SG cab, in front fenders, top of rear fender, and top rear cab. 3200 lumen vs. the OEM lights at 600 lumens. This light uses 3D reflector cups for the best light output.

PAR-36 size replacement LED light for the old style sealed beam halogen light. 5-watt CREE LED chips. Actual power use is around 18 watts, effective lumen around 1400, raw lumen around 2200.

LED Hood Conversion Kit, LED-2755. The kit comes with a wire harness (plug and play), housing, billet, bezel, and all mounting hardware. Add your choice of light model.

LED Hood Conversion Kit, LED-3010. The kit comes with a wire harness (plug and play), housing, billet, bezel, and all mounting hardware. Add your choice of light model.

LED Hood Conversion Kit, LED-4200. The kit comes with a wire harness (plug and play), housing, billet, bezel, and all mounting hardware. Add your choice of light model.

LED Hood Conversion Kit, LED-4600. The kit comes with a wire harness (plug and play), housing, billet, bezel, and all mounting hardware. Add your choice of light model.

A steel housing with a single bolt for mounting in the fenders on some tractors. Rubber grommet included.

Rubber grommet for the PAR-36 size lights. 3 tabs lock onto the OEM Hobbs housing. Not for the front fender lights. Replaces JD part# R42689.

PAR-36 size rubber housing. Simple rubber housing with a steel mounting bracket.

LED-91, amber with a built-in resistor. No need for special LED flasher relays! This model fits Sound guard cabs and older Steigers.

LED Tail Light for John Deere Tractors. 3 wire light, including tail and stop light function. The eyelet is the ground, the brown wire is the tail light, and the yellow wire is for the stop light (if equipped). OEM Replacement: John Deere: AR78825, RE39223.

Par-36 "Guide" Glare Guard. OEM Part# R54047, R71234